Industrial & Food Process METAL DETECTORS

Used Fortress Phantom METAL DETECTOR with elevating belt conveyor, 4x5.5 opening, all food grade stainless steel, Y4278

Fortress Phantom METAL DETECTOR with INCLINE BELT conveyor, 5.5 inch HIGH by 14 inch wide USABLE aperture opening, all stainless steel. 10 foot long by 12 inch wide ribbed interlocking plastic chain type belt, with pneumatic blow-off reject. 1HP drive with variable speed control 110 volt single phase electrical input.

As of this writing, this Fortress Phantom METAL DETECTOR with elevating belt conveyor is in stock at Alard in EXCELLENT operational, electrical, mechanical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process metal detection equipment needs.

Alard item reference #: Y4278

FOOD PROCESS METAL DETECTOR with BELT CONVEYOR, 20x12, stainless steel...

A Cassel Metalshark2 MULTI-FREQUENCY washdown sealed stainless steel conveyorized metal detection system for industrial process applications, with...

~ 10 7/8 inch (275mm) high by 19 11/16 inch (500mm) wide net USEABLE aperture opening with the conveyor belt in place...

~ The 304 stainless steel frame washdown belt transfer conveyor has a 71.5 inch (1800mm) long by 17 9/16 inch (450mm) wide interlocking plastic chain type belt, running at a 30 inch (762mm) working height, with adjustable feet allowing +/- 4 inch (100mm) height adjustment.

~ The thru-conveyor is complete with a belt-stop alarm reject configuration, and a variable frequency speed control for the 110 volt single phase drive, adjustable from 16 to 75 feet per minute (approximately 5 to 23 meters per minute) belt speed.

~ A food grade metal detector specifically built for food processing and other industrial production line metal detection applications. All food grade / USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65/Nema4,4x,6,12 & 13 control enclosure).

~ The search head is complete with integral touchpad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.

~ 110 volt single phase (standard household current) electrical input.

~ FOUR FREQUENCY LEVELS (35kHz, 75kHz, 150kHz, and 300kHz), allowing for optimal sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc) allowing for maximum versatility with the widest range of products. The optimal frequency is automatically set by the system in "product learn"mode to maximize sensitivity / minimize false rejects with your specific product.

~ Sensitivity varies depending on product run, and frequency setting (determined by product characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation, however the manufacturer rates dry sensitivity for this head, with no product in the aperture, at a maximum sensitivity of 1.7mm ferrous, 2.3mm non ferrous, and 2.7mm stainless steel at 300 kHz.

~ Quick teach feature learns new products in 4 to 7 passes.

~ The control unit allows for 120 product presets, where product presets save the frequency setting with the other tuning data.

~ Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance expenses.

~ 304 stainless steel search head and conveyor construction.

~ NEW EQUIPMENT - Includes a 2 year manufacturer warranty on hardware / parts.

As of this writing, this food process metal detector with conveyor belt is NEW IN STOCK at Alard Equipment Corp., ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference #:Y4369

FORTRESS FOOD GRADE METAL DETECTOR with VIBRATING CONVEYOR, 24x3, stainless steel...

A Fortress Stealth metal detection system with Smalley Manufacturing vibrating bed transfer conveyor, for food processing and packaging and/or other applications where detection of metal contamination is necessary...

FEATURES:
~ 24 inch by 3 inch high USABLE aperture opening.
~ Stainless steel search head enclosure.
~ Complete with integral, digital touch pad controls.
~ Vibratory metal detector through-conveyor measuring 20 inch wide by 104 inch long shaker table with 2.5 inch high sides; --anti-static plastic body section through metal detection search head.
~ Dual feed hoppers for gentle product deceleration and feed:
+ Upper hopper measures 48 inch by 40 inch with 10 inch diameter discharge.
+ Lower hopper measures 36 inch by 50 inch with 16.5 inch wide gate and level control sensor.
+ 76 inch infeed height to upper hopper, as configured.
~ Pneumatic triggered trap-door reject.
~ Eccentric drive powered by 1HP motor.
~ All food grade sanitary stainless steel construction.
~ 208/230 volt 3 phase electrical input.

As of this writing, this food process metal detection system has just been received into stock at ALARD, and has been test run and is in VERY GOOD operational condition.

CALL 315-589-4511 to confirm current availability and discuss your specific metal detection needs!

ALARD item reference #: Y4286

Used Fortress Phantom METAL DETECTOR with elevating belt conveyor, 4x6 opening, all food grade stainless steel, Alard item Y4277

FOOD PROCESS METAL DETECTOR with ELEVATING BELT CONVEYOR, 14x5.5 opening, all food grade stainless steel...

A Fortress Phantom stainless steel belt-transfer metal detector with a 5 7/8 inch high by 14 inch wide USABLE aperture opening, on a stainless steel goose-neck incline conveyor, with pneumatic blow-off reject. Last used for product inspection of bagged products in line after a vertical form-fill-seal machine (VFFS) bagger; to receive the bags from the low discharge and raise them back to line level while metal-checking...

FEATURES:
~ Fortress stainless-steel search head enclosure with integral touchpad operator control panel.
~ Stainless steel elevating conveyor with 10 foot long by 12 inch wide interlocking plastic chain type belt with 1/4 inch by 5/16 inch rectangular openings; with rubber non-slip top strips.
~ Goosneck conveyor configuration, with an approximatetly 2 foot long horizontal infeed at a 10 inch infeed height,with an 8 foot incline section leading to a 38 inch discharge clearance height, on height-adjustable legs.
~ Left to right product flow direction from the operator control position.
~ Pneumatic blow-off reject system configuration. Other reject configurations available, CALL 315-589-4511 to discuss your particular food process metal detection equipment needs.
~ Complete with a (new) gasketed fiberglass control box.
~ 1HP conveyor belt drive, with variable speed control.
~ 110 volt single phase (standard household current) electrical input.

As of this writing, this metal detector with goose-neck elevating conveyor in stock at Alard in EXCELLENT operational, electrical, mechanical and cosmetic condition, available for immediate shipment.

CALL ALARD at 315-589-4511 to confirm current availability, and to discuss your particular food process metal detection need(s).

Alard item reference #:Y4277

FOOD GRADE METAL DETECTOR, 16x4 opening, with conveyor belt, Fortress Phantom...

A reconditioned Fortress Phantom food process metal detection system with a new conveyor for in-line industrial food process metal detection, with 16 inch wide by 3 7/8 inch high usable aperture opening with belt transfer through-conveyor belt in place...

FEATURES:

~ Fortress Phantom model metal detection search head with epoxy painted aluminum enclosure, and:
+ 16 inch wide by 5 inch overall aperture opening (3 7/8 inch high by 16 inches wide usable opening with belt in place).
+ Integral touchpad operator control panel with display and LED indicator lights.

~ NEW stainless steel belt-transfer through-conveyor with:
+ 76 inch long by 13.75 inch wide interlocking plastic chain type belt.
+ Belt stop alarm REJECT system, triggers buzzer alarm and stops the belt on contaminated product detection. Other reject configurations are available, CALL 315-589-4511 to discuss your specific food process metal detection application requirements.
+ Tubular stainless steel conveyor frame.
+ Anti-static UHMW plastic conveyor bed.
+ IP-65 stainless steel motor enclosure, with corrosion resistant aluminum gear reducer.
+ New gasketed fiberglass control panel with on-off switch, reject system reset and variable speed control.

~ Left to right product flow from the the operator controls position.
~ Single 110 volt single phase electrical input (standard household current).

As of this writing, this refurbished METAL DETECTOR with NEW belt-conveyor is in stock at Alard, in EXCELLENT operational, electrical, mechanical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial process metal detection system needs.

Alard item reference #:Y3481

INLINE METAL DETECTOR, 6 inch pipeline, with reject valve, all stainless steel USDA food grade sanitary, IP-66 washdown, Alard item Y4816

CASSEL PIPELINE METAL DETECTOR, with 6 inch tube, automatic reject valve, food grade sanitary stainless steel...

A stainless steel Cassel inline metal detector with pneumatic divert valve for pumped food products including meats, patees, sauces, pastes, slurries, creams, oils, purees, salsa, refried beans, wet salads, and other viscous or liquid food products hot or cold. Also useful for vacuum packed applications where product is pumped to avoid oxidation. For food safety metal detection on food products as they travel through process pipelines.

FEATURES:

~ Has 6 inch diameter by 36 inch long anti-static UHMW plastic through-tube running through an 8 inch diameter opening in the metal detection sensor-head.
~ All USDA sanitary thread inlet/outlet connections / fittings.
~ Pneumatic ball valve reject -- straight-through good product discharge, down-facing reject discharge.
~ Cord connected factory control box rated for IP66 pressure hose WASH-DOWN applications.
~ Digital touch-pad operator controls.
~ All food grade sanitary stainless steel construction.
~ Metal detection head, divert valve & control panel mounted together on a common stainless steel frame.
~ 110 volt single phase (standard household current) electrical input.
~ Compressed air required for automatic reject valve.

As of this writing, this industrial food process pipeline metal detector is in stock at ALARD, in EXCELLENT operational, electrical & cosmetic condition, availa ble for immediate shipment as configured.

CALL 315-589-4511 to confirm availability and discuss your food process metal detection needs.

ALARD item reference #: Y4816