Blentech VERSATHERM TP22088 blending cooker, Y4673
Used Blentech VersaTherm BLENDING COOKER, jackted twin ribbon scrape-surface RIBBON BLENDER, 300 gallon, USDA food grade sanitary, stainless steel, Alard item Y4673
TWIN RIBBON MIXER-BLENDER-COOKER, with SCRAPE SURFACE agitation, 1,200 lb capacity, USDA, all stainless steel...
A 40 cubic foot / 300 gallon / 1,200 lb capacity Blentech Versatherm BLENDING COOKER Model TP-22088 steam jacketed ribbon blender with dual bi-directional scraper-agitators, and twin end bottom discharge doors for mixing / blending / heating / cooking food products. Don't settle for a cooking kettle, increased throughput with better heat transfer, for blending, cooking, sauteeing, stir-frying of medium to high viscosity ground meats, concentrated soups and slurries, chili, jams, preserves, jellies, taco meat, spring roll filling, lasagna filling, pie fillings, stews, sauces, ready meals, rice, pasta, grains, cheeses, pet foods, plant based proteins, and other fruit, vegetable, and meat products.
~ Manufacturer rated for 40 cubic foot / 300 gallons / 1200 lb capacity.
~ Mixing vessel measures 34.5 inch wide by 87.5 inch long by 28 inch deep double-U shaped with hinged safety grid.
~ Stainless steel steam jacket manufacturer tagged for 90 psi working pressure. Blentech wrap-around steam jackete is manufacturer rated as offering a scraped surface heat exchange with a surface-to-product volume ratio 50% greater than any hemispherical cooking kettle.
~ Agitators have 2 inch wide by 1/2 inch thick ribbons mounted on 4 inch shafts with bi-directional scrapers which cover the total heat transfer surface area, and are designed to maximize heat transfer and minimize / eliminate product build-up.
~ Gasketed / sealed heavy stainless steel lid with dual pneumatic cylinder power lift.
~ Dual 17 inch wide by 7.75 inch high opening bottom end discharges with gasketed pneumatic discharge doors.
~ 70.5 inch high infeed, 37 inch discharge height.
~ Independent pneumatic cylinders control left discharge, right discharge & lid lift.
~ Each of the agitator shafts has it's own 7.75 HP 3 phase electric drive motor.
~ USDA food grade sanitary stainless steel construction.
As of this writing, this jacketed scrape-surface twin shaft ribbon blender is in stock at ALARD, in GOOD condition, available for timely shipment.
CALL 315-589-4511 to confirm availability and discuss your particular industrial food process cooking, mixing and blending needs.
ALARD item reference. #: Y4673
Urschel M6 DICER, dicing HAM, Alard item Y4639
Urschel Model M6 DICER cutting ham, dicing ham...
URSCHEL MODEL M6 DICER...
A two-dimensional vegetable and meat cutter designed for dicing, strip cutting, or shredding a variety of products through a wide range of sizes. This versatile dicing machine, strip-cutter, and shredder is ideally suited for cutting beef, pork, poultry or fish through a wide temperature range from fresh chilled to hot cooked. Also manufacturer recommended as a leafy greens chopper for collard greens, kale, leeks, mustard greens, and spinach. This versatile machine is also recommended for cutting other food products into strips or squares including fruit leathers, flat breads, tortillas, pita chips, brownies, and croutons. This is a high-volume cutting machine that operates continuously at high production capacities, and is designed for easy cleanup and maintenance.
~ Infeed thickness of up to 1 inch (25.4mm).
~ Circular knife cuts from 3/16 to 1.5 inches (4.8mm to 38mm).
~ Crosscut knife cuts from 1/8 inch to 3 inches (3.2mm to 76.2mm).
~ STRIP CUTS can be made by removing the crosscut knife spindle. The length and thickness of the strips will depend on the size of the original product.
~ SHREDS - many types available for applications such as cooked pork, cooked beef, or cooked chicken, in medium, long or fine shreds.
~ This machine comes with 1/4 inch feed drum, and a 3/4 inch crosscut spindle. Circular knife spindle spacings can be easily adjusted in increments 1/4”. Other cutting parts are available from the manufacturer: --CALL 315-589-4511 to discusss your particular cutting specifications.
~ 10 inch wide feed belt with 35 inch length of open belt-feed area..
~ Includes factory stainless steel operator control panel with safety interlock system.
~ USDA food grade construction, including stainless steel cutting spindles, tubular support frame, guards, shrouds, infeed hopper and discharge chute.
~ 5 HP 208 / 230 / 460 volt 3 phase drive motor.
As of this writing, this Urschel M6 DICER is available in stock at Alard, in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for timely shipment.
CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food processing cutting equipment needs.
Alard item reference #:Y4639
Food METAL DETECTOR with conveyor belt, 20x8, Cassel Metalshark, Y4768
FOOD PROCESS METAL DETECTOR with BELT CONVEYOR, 21x8, 304 stainless steel...
A Cassel Metalshark2 MULTI-FREQUENCY washdown sealed 304 stainless steel conveyorized metal detection system for industrial process applications, with...
~ Approximately 8 inch (203mm) high by 20.6 inch (525mm) wide net USABLE aperture opening with the conveyor belt in place.
~ The 304 stainless steel frame washdown belt transfer conveyor has a 70.5 inch (1791mm) long by 18.5 inch (470mm) wide interlocking plastic chain type belt, running at a 31.5 inch (800mm) working height, with adjustable feet allowing +/-4 inch (100mm) height adjustment.
~ The thru-conveyor is complete with a photo-eye product sensor, a belt-stop alarm reject configuration, and a variable speed control for the 110 volt single phase drive, adjust able from 16 to 75 feet per minute (approximately 5 to 23 meters per minute) belt speed.
~ A food grade metal detector specifically built for food processing and other industrial production line metal detection applications. All food grade / USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65/Nema4,4x,6,12 & 13 control enclosure).
~ The search head is complete with integral touchpad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.
~ 110 volt single phase (standard household current) electrical input.
~ FOUR FREQUENCY LEVELS (35kHz, 75kHz, 150kHz, and 300kHz), allowing for optimal
sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc) allowing for maximum versatility with the widest range of products. The optimal frequency is automatically set by the system in "product learn" mode to maximize sensitivity / minimize false rejects with your specific product.
~ Sensitivity varies depending on product run, and frequency setting (determined by product characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation.
~ Quick teach feature learns new products in 4 to 7 passes.
~ The control unit allows for 120 product presets, where product presets save the frequency setting with the other tuning data.
~ Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance expenses.
~ 304 stainless steel search head and conveyor construction.
~ NEW EQUIPMENT - Includes a 2 year manufacturer warranty on hardware / parts.
As of this writing, this conveyorized metal detection system is in stock NEW at Alard, ready to go and available for immediate shipment.
CALL 315-589-4511 to confirm availability, and to discuss your particular industrial product inspection needs.
Alard item reference #:Y4768
Rietz Bepex EXTRUCTOR, Y4800
Used Rietz Bepex Extructor model RE-24, 75 HP, 24 inch block grinder, food grade sanitary, stainless steel, Alard item Y4800
RIETZ EXTRUCTOR Model RE-24, frozen block grinder, 75HP...
A Rietz Bepex RE-24-K9E933 EXTRUCTOR industrial pulverizer machine, engineered with slow speed and high torque for fracturing, crushing, grinding and tearing large frozen blocks or barrels of bulk materials, such as animal products, meats, cheese, fruits and/or vegetables...
~ 29.5 inch wide by 27 inch long by 41 inch deep cut chamber.
~ 24 inch diameter rotor.
~ 16-spoke discharge plate / die plate / extrusion plate.
~ 101 inch high infeed, 58.5 inch discharge height.
~ Food grade sanitary stainless steel product contact surfaces with heavy stainless steel support frame.
~ 75 horsepower chain drive motor..
~ 460 volt 3 phase electrical input.
As of this writing, this Rietz Bepex EXTRUCTOR is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, ready-to-go and available for immediate shipment.
CALL 315-589-4511 to confirm availability and discuss your industrial food process cutting, grinding, pulverizing & particle reduction size needs.
ALARD item reference #: Y4800
6-inch pipeline metal detector, washdown, stainless steel Y4816
INLINE METAL DETECTOR, 6 inch pipeline, with reject valve, all stainless steel USDA food grade sanitary, IP-66 washdown, Alard item Y4816
CASSEL PIPELINE METAL DETECTOR, with 6 inch tube, automatic reject valve, food grade sanitary stainless steel...
A stainless steel Cassel inline metal detector with pneumatic divert valve for pumped food products including meats, patees, sauces, pastes, slurries, creams, oils, purees, salsa, refried beans, wet salads, and other viscous or liquid food products hot or cold. Also useful for vacuum packed applications where product is pumped to avoid oxidation. For food safety metal detection on food products as they travel through process pipelines.
~ Has 6 inch diameter by 36 inch long anti-static UHMW plastic through-tube running through an 8 inch diameter opening in the metal detection sensor-head.
~ All USDA sanitary thread inlet/outlet connections / fittings.
~ Pneumatic ball valve reject -- straight-through good product discharge, down-facing reject discharge.
~ Cord connected factory control box rated for IP66 pressure hose WASH-DOWN applications.
~ Digital touch-pad operator controls.
~ All food grade sanitary stainless steel construction.
~ Metal detection head, divert valve & control panel mounted together on a common stainless steel frame.
~ 110 volt single phase (standard household current) electrical input.
~ Compressed air required for automatic reject valve.
As of this writing, this industrial food process pipeline metal detector is in stock at ALARD, in EXCELLENT operational, electrical & cosmetic condition, availa ble for immediate shipment as configured.
CALL 315-589-4511 to confirm availability and discuss your food process metal detection needs.
ALARD item reference #: Y4816
Urschel SL-A DICER cutting meat cubes, Y4563
Used Urschel SL-A meat strip-cutter, cube-cutter, dicer, slicer, demo video cutting meat cubes, Alard item Y4563
Urschel Model SL-A MEAT DICER, strip cutter, slicer...
The Urschel SL-A MEAT CUBE CUTTER is manufacturer recommended as designed for continuous operation, uniformly cutting dices, strip cuts or slices of cooked or raw frozen tempered meats, including, but not limited to pepperoni, hard salami, cooked roast beef, ham, pork, mutton, chicken, liver, seafood, fish, pet food, onions, and cabbage.
~ Manufacturer rated for infeed of firm products up to 4 inches (101.6mm) in any dimension.
~ A three-dimensional cutter manufacturer rated for cuts (with appropriate change parts).
+ Slice knife cuts to 1/2 inch (12.7mm).
+ Circular knife cuts: 1/8 inch to 2 inches (3.2 to 50.8mm).
+ Crosscut kife cuts: 1/8 inch to 3 inches (3.2 to 76.2mm).
+ Many sizes and shapes of cut product can be produced by using some or all of the spindles and adjusting the slice thickness.
- Slices can be produced by removing the circular and crosscut knife spindles.
- Strip cuts can be made by removing the crosscut knife spindle, whence the length of the strips will depend on the size of the original product.
- Note re cutting cubes / dices with all three spindles: This machine makes all three cuts on the cube separately, so the product is not crushed as it wouldl be on certain other types of dicing machinery.
+ CALL 315-589-4511 to discuss your specific industrial food process cutting application.
+ Manufacturer literature rates the throughput capacity of this machine at 2,500 to 5,000 lbs per hour depending on cut size and product being processed.
~ Food grade stainless steel USDA sanitary construction.
As of this writing, this Urschel SL-A meat cube and strip cutting machine is in stock at Alard, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.
CALL 315-589-4511 to confirm availability, and to discuss your particular industrial meat processing particle size reduction application.
Alard item reference #: Y4563