No results.

Industrial Food Processing and Packaging Machines from Alard Equipment Company

Industrial food processing and packaging machine video demonstrations from Alard Equipment Corporation: alard.com

CALL 315-589-4511 to discuss your food process and food packaging equipment needs.

  1. Liquid Product Recoup Press, NBE model S9, Y5006

    Used Liquid Food Product RECOVERY PRESS, NBE S9 PRODUCT SAVER, food grade, stainless steel, Alard item Y5006

    PACKAGED LIQUID PRODUCT SAVER, food grade, stainless steel

    A National Bulk Equipment Model S9 Product Saver, liquid food product recovery press for automated separation and reclamation of liquid contents from packaging, bottles & containers...

    FEATURING:
    ~ 16 inch by 16 inch infeed opening at 51 inch high.
    ~ 10 inch diameter auger with 3 inch high flights on 8 inch centers.
    ~ 3/16 inch perforations for liquids expulsion.
    ~ 16 inch long packaging discharge with pneumatic cylinder press and 1/8 inch perforations for additional drainage.
    ~ Liquid product recovery tank with removable 3/64 inch perforated screen and 2 inch diameter sanitary Triclamp side bottom outlet for recouped liquids discharge.
    ~ All food grade sanitary stainless steel.
    ~ 2HP drive motor.
    ~ Compressed air required for expelled packaging press..
    ~ 460 volt 3 phase electrical input.
    ~ Last used for gallon milk jugs.

    As of this writing, this liquid reclaimer is in stock at ALARD, in EXCELLENT condition, available for timely shipment.

    CALL 315-589-4511 to confirm availability and discuss your waste food product reclaim needs.

    ALARD item reference #: Y5006

  2. Urschel G-A DICER, video demo cutting cassava, yuca, plantains, Y4546

    Refurbished Urschel model G-A, DICER, strip cutter, slicer, Alard item Y4546

    URSCHEL Model G-A DICER, strip cutter, slicer, French fry cutter...

    A reconditioned Urschel dicer. The Urschel model G-A is a three-dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.

    Three cutting dimensions...

    ~ Slice thickness: From 1/8 inch (3.2mm), up to 3/4 inch (19.1mm), (knob adjustable).
    ~ Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).
    ~ Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 7/8 inch (22.2mm), (change part).
    ~ By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).
    ~ Cuts uniform cubes / dices up to 3/4 inch.
    ~ We can complete this machine with cutting parts to fit most standard cutting specifications: Please call 315-589-4511 to tell us your cut size requirement!

    This cutting machine FEATURES...
    ~ Stainless steel slice shell and impeller with 10 inch diameter slice shell opening.
    ~ Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.
    ~ Stainless steel factory control box with safety interlock system.
    ~ Casters (locking on drive end) for portability.
    ~ 2 HP 3 phase drive with stainless steel shrouded motor.
    ~ 460 volt 3 phase electrical input.

    As of this writing, this reconditioned Urschel dicer is in stock, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for timely shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your industrial volume food cutting machine / equipment needs.

    Alard item reference #: Y4546

  3. New in stock FOOD PROCESS METAL DETECTOR with conveyor 20x11 Y4845

    New in stock FOOD PROCESS METAL DETECTOR with conveyor belt, 20x11, Cassel Metalshark2, Alard item Y4845

    FOOD PROCESS METAL DETECTOR with BELT CONVEYOR, 20x12, stainless steel...

    A Cassel Metalshark2 MULTI-FREQUENCY washdown sealed stainless steel conveyorized metal detection system for industrial process applications, with...

    ~ 10 7/8 inch (275mm) high by 19 11/16 inch (500mm) wide net USEABLE aperture opening with the conveyor belt in place...

    ~ The 304 stainless steel frame washdown belt transfer conveyor has a 76.5 inch (1943mm) long by 17 5/8 inch (448mm) wide interlocking plastic chain type belt, running at a 30 inch (762mm) working height, with adjustable feet allowing an additional 5 inch (127mm) height adjustment up.

    ~ The thru-conveyor is complete with a belt-stop alarm reject configuration, and a variable frequency speed control for the 110 volt single phase drive, adjustable from 16 to 75 feet per minute (approximately 5 to 23 meters per minute) belt speed.

    ~ A food grade metal detector specifically built for food processing and other industrial production line metal detection applications. All food grade / USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65/Nema 4,4x,6,12 & 13 control enclosure).

    ~ The search head is complete with integral touchpad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.

    ~ 110 volt single phase (standard household current) electrical input.

    ~ FOUR FREQUENCY LEVELS (35kHz, 75kHz, 150kHz, and 300kHz), allowing for optimal sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc) allowing for maximum versatility with the widest range of products. The optimal frequency is automatically set by the system in "product learn"mode to maximize sensitivity / minimize false rejects with your specific product.

    ~ Sensitivity varies depending on product run, and frequency setting (determined by product characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation, however the manufacturer rates dry sensitivity for this head, with no product in the aperture, at a maximum sensitivity of 1.7mm ferrous, 2.3mm non ferrous, and 2.7mm stainless steel at 300 kHz.

    ~ Quick teach feature learns new products in 4 to 7 passes.

    ~ The control unit allows for 120 product presets, where product presets save the frequency setting with the other tuning data.

    ~ Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance expenses.

    ~ 304 stainless steel search head and conveyor construction.

    ~ NEW EQUIPMENT - Includes a 2 year manufacturer warranty on hardware / parts.

    As of this writing, this food process metal detection system is new IN stock at Alard, available for immediate shipment. Call your Alard Sales Representative at 315-589-4511 to confirm current availability and to discuss your industrial process metal detector need.

    Alard item reference #:Y4845

  4. PND SS8 STICK-MAKER, Wedger, Slab Cutter, Y4972

  5. GARLIC PEELING LINE Y4912

    Used GARLIC PEELING LINE, like new condition, in stock at Alard, item Y4912

    A J.J. BROCH (Spain) garlic peeling line including feeder, splitter, inspection conveyors and peeler collection boxes manufacturer rated for 1,000 pounds-per-hour finished production...

    FEATURES:

    INFEED HOPPER:

    70 inch by 70 inch by 26 inch deep hopper.

    Hopper tapers to 11.5 inch square center bottom outlet with discharge chute.

    50 inch high infeed.

    Adjustable height legs.

    Painted steel construction.

    ELEVATING BELT CONVEYOR:

    Bottom end fits the discharge chute of the INFEED HOPPER.

    12 inch wide by 105 inch long black rubber belt with 1 inch high cleats on 12 inch centers.

    70 inch high discharge with adjustable height feet.

    Painted mild steel construction.

    GARLIC CRACKER / SPLITTER:

    Whole garlic is top fed into a series of brushes and dual belt cracking system.

    Top mounted blower to exhaust chaff.

    Cracked / split cloves are discharged at 43 inch high.

    Equipped with operator control panel.

    Painted mild steel construction.

    SORTING / MANUAL CRACKING CONVEYOR:

    22 inch wide by 112 inch long black rubber belt.

    Center/overhead light.

    42 inch working height.

    Painted mild steel construction.

    SORTING / MANUAL CRACKING CONVEYOR:

    22 inch wide by 112 inch long black rubber belt.

    Center/ overhead light.

    Blower hood, with adjustable louver, vacuums away garlic skins only.

    36 inch working height.

    Painted mild steel construction.

    HOPPER / ELEVATING CONVEYOR:

    Cloves from SORTING CONVEYOR deposit into 31 inch wide by 40 inch long hopper.

    31 inch wide by 120 inch long rubber belt with 1.5 inch high cleats on 4 inch centers.

    All food grade sanitary stainless steel construction.

    Discharges into the PEELER...

    GARLIC PEELER:

    Cracked/split cloves drop onto a 33 inch wide rubber belt with 1.5 high cleats on 4 inch centers inside the chamber.

    A traveling head moves back & forth directly over the cleats and blows high pressure air into the belt pockets.

    Top mounted fan vacuums debris from the belt pockets at the discharge end of the peeler.

    Under the main belt is another 46 inch wide rubber belt to collect debris -- this belt travels in the opposite direction and deposits debris to the infeed end of the peeler.

    FINAL INSPECTION CONVEYOR:

    40 inch wide by 19 foot long flat rubber belt with 3.5 inch high tapered sides.

    Top center mounted lights.

    36 inch working height.

    All food grade sanitary stainless steel construction.

    WASH TANK / BATH:

    42 inch wide by 20 inch tapered hopper feeds a 16 inch wide perforated plastic belt with 2 inch high cleats on 12 inch centers.

    Belt travels 90 inches horizontally through a liquid filled area which then inclines for 60 inches to drain.

    Cloves are discharged by a chute at 44 inches high.

    Conveyor lifts out via pneumatic cylinders for ease of cleaning & maintenance.

    All food grade sanitary stainless steel construction.

    DRYER:

    16 inch wide by 108 inch long perforated plastic belt with 2 inch high cleats on 10 inch centers.

    Dual overhead blowers for drying cloves.

    Control panel for all "PEEL LINE COMPONENTS" with speed controls.

    Peeled garlic discharges at 37 inch high.

    WASTE COLLECTION CONTAINERS (2):

    One is used to accept skins/debris from CRACKING Portion, Other is for PEELING Portion.

    81 inch long by 81 inch wide by 85 inch high.

    Designed to be lifted by a forklift and positioned over a dumpster.

    Manual lever to open hinged bottom panels to completely dump all contents from bin / container.

    460 volt 3 phase and 110 volt single phase (standard household current) electrical inputs.

    As of this writing, this garlic cracking line / garlic peeling line is in stock at ALARD, in LIKE NEW condition and available for immediate shipment.

    CALL 315-589-4511 to confirm availability and discuss your food processing needs.

    ALARD item reference #: Y4912

  6. Fitzpatrick Fitzmill DKAS012, Y4659