Solbern PTF-DP Particulate Tumble Filler Y4616
Used, Solbern PTF-DP volumetric particulate tumble filler for delicate product, Alard item Y4616
SOLBERN Model PTF-DP TUMBLE FILLER, all stainless steel, volumetric delicate product particulate filling machine.
The "Delicate Product" version of the versatile Solbern PTF, a volumetric particulate tumble filler which is manufacturer rated for gentle handling and gradual filling for whole, sliced, diced, chunky and / or fragile food products, at speeds of 15 to 600 containers per minute, depending on product and container size, with rapid container size changeover without the need for change parts. Manufacture literature rates for asparagus (cut), beans (cut) beats (whole, cut, sliced, diced), carrots (cut, sliced, diced), kernel corn, dried and soaked beans, lima beans, mixed vegetables, okra, peas, spinach (cut and diced), potatoes (cut, sliced and diced), cut squash, sweet potatoes (sliced, diced), tomatoes (sliced and diced), apples (sliced, diced), apricots (halves, dices), berries (whole and halves) cherries, figs, grapes, orange and grapefruit sections, peaches (halves and slices), pears (sliced, diced), plums (halves, sliced, diced), pineapple (diced), shredded coconut, coffee beans, dehydrated products, meats, nuts and snack items, sea food items, and other particulate products.
~ Adjustable for up to 603 x 700 (#10) cans.
~ 14 inch wide infeed chute.
~ Dimpled rigidized surface vibrating feed pan for frozen product.
~ 3/16 inch perforated drum screens with removable side panels.
~ 10.5 foot long through-conveyor with plastic coated conveyor chain.
~ Adjustable guide rails with tip section.
~ 32 inch working height on height-adjustable foot pads.
~ Solid underside pan with 2 inch drain.
~ Solid pan under conveyor discharge.
~ All food grade stainless steel construction.
~ Stainless steel shrouded washdown drive motors.
~ Requires 80 psi / 11cfm air input.
~ 208 / 230 volt 3 phase electrical input.
As of this writing, this SOLBERN delicate product tumble filler is in stock at ALARD, in VERY good operational condition, available for immediate shipment without variable speed controls, or (at extra charge) we can complete with variable speed controls prior to shipment.
CALL 315-589-4511 to confirm availability and discuss your food equipment needs.
ALARD item reference #: Y4616
SLIVER REMOVER REEL, size grading drum, VIDEO DEMO, Y4971
Used Charlie's Machine SIZE GRADER REEL, SLIVER REMOVER, 36x24, food grade, stainless steel, Alard item Y4971
GRADER REEL / SLIVER REMOVER, 24x36, food grade, stainless steel...
A Charlie's Machine Model RDS size-grader reel, rotary drum fruit and vegetable grading machine, for size grading, size sorting, sliver removal, fines removal, grading out shorts, solids separation, dewatering and/or feeding to downstream components...
~ 24 inch diameter by 36 inch long grading drum with...
+ 3/8 inch round rod.
+ 3/8 inch sieve.
+ Manually adjustable pitch.
~ 11 inch wide by 22 inch long infeed chute with 4.5 inch high sides.
~ 19 inch wide by 36 inch long solid underpan.
~ 52 inch high infeed, 35 inch discharge height.
~ 1/4 HP chain drive trunnion with variable speed control.
~ All food grade sanitary stainless steel including tube frame.
~ On casters for portability.
~ 110 volt single phase (household current) electrical input.
As of this writing, this rotary drum grading reel is in stock at ALARD, in EXCELLENT condition and available for immediate shipment.
CALL 315-589-4511 to confirm availability and discuss your food product grading needs.
ALARD item reference #: Y4971
CCM Magnuson CORN CUTTER, cutting corn, Alard item Y4670
Used CCM CORN CUTTER, stainless steel, Alard item Y4670
MAGNUSON / CCM CORN CUTTER, manual feed, electric, all stainless steel...
A Magnuson Model 2-E-HC hand fed corn kernel cutter is a space saving, self-contained, all stainless steel, low cost alternative to larger automatic fed systems. Ideal for batch processing, rework, and moderate volume production.
~ 50 inch long single flat belt infeed belt (new) with 32 inch open placement area.
~ New rubber infeed cob gripping rolls and spike rolls (Note: Pictures show both the old and new rubber grippers).
~ Spring loaded No. 2 cutting head included.
~ Safety interlock switch on cutting head guard/cover.
~ 43 inch high infeed, 30.5 inch kernel discharge opening height.
~ Designed to self-clear jams.
~ Lubrication cluster for ease of maintenance.
~ Stainless steel control box with On/Off, Reverse & E-stop switches.
~ All food grade sanitary stainless steel construction.
~ 5 HP drive motor with variable speed control.
~ 230 volt 3 phase electrical input.
As of this writing, this corn kernel cutter is in stock at ALARD, in VERY GOOD condition and available for timely shipment.
CALL 315-589-4511 to confirm availability and discuss your particular food process cutting machine requirements.
ALARD item reference #: Y4670
Liquid Product Recoup Press, NBE model S9, Y5006
Used Liquid Food Product RECOVERY PRESS, NBE S9 PRODUCT SAVER, food grade, stainless steel, Alard item Y5006
PACKAGED LIQUID PRODUCT SAVER, food grade, stainless steel
A National Bulk Equipment Model S9 Product Saver, liquid food product recovery press for automated separation and reclamation of liquid contents from packaging, bottles & containers...
~ 16 inch by 16 inch infeed opening at 51 inch high.
~ 10 inch diameter auger with 3 inch high flights on 8 inch centers.
~ 3/16 inch perforations for liquids expulsion.
~ 16 inch long packaging discharge with pneumatic cylinder press and 1/8 inch perforations for additional drainage.
~ Liquid product recovery tank with removable 3/64 inch perforated screen and 2 inch diameter sanitary Triclamp side bottom outlet for recouped liquids discharge.
~ All food grade sanitary stainless steel.
~ 2HP drive motor.
~ Compressed air required for expelled packaging press..
~ 460 volt 3 phase electrical input.
~ Last used for gallon milk jugs.
As of this writing, this liquid reclaimer is in stock at ALARD, in EXCELLENT condition, available for timely shipment.
CALL 315-589-4511 to confirm availability and discuss your waste food product reclaim needs.
ALARD item reference #: Y5006
Urschel G-A DICER, video demo cutting cassava, yuca, plantains, Y4546
Refurbished Urschel model G-A, DICER, strip cutter, slicer, Alard item Y4546
URSCHEL Model G-A DICER, strip cutter, slicer, French fry cutter...
A reconditioned Urschel dicer. The Urschel model G-A is a three-dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.
Three cutting dimensions...
~ Slice thickness: From 1/8 inch (3.2mm), up to 3/4 inch (19.1mm), (knob adjustable).
~ Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).
~ Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 7/8 inch (22.2mm), (change part).
~ By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).
~ Cuts uniform cubes / dices up to 3/4 inch.
~ We can complete this machine with cutting parts to fit most standard cutting specifications: Please call 315-589-4511 to tell us your cut size requirement!
This cutting machine FEATURES...
~ Stainless steel slice shell and impeller with 10 inch diameter slice shell opening.
~ Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.
~ Stainless steel factory control box with safety interlock system.
~ Casters (locking on drive end) for portability.
~ 2 HP 3 phase drive with stainless steel shrouded motor.
~ 460 volt 3 phase electrical input.
As of this writing, this reconditioned Urschel dicer is in stock, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for timely shipment.
CALL 315-589-4511 to confirm availability, and to discuss your industrial volume food cutting machine / equipment needs.
Alard item reference #: Y4546
New in stock FOOD PROCESS METAL DETECTOR with conveyor 20x11 Y4845
New in stock FOOD PROCESS METAL DETECTOR with conveyor belt, 20x11, Cassel Metalshark2, Alard item Y4845
FOOD PROCESS METAL DETECTOR with BELT CONVEYOR, 20x12, stainless steel...
A Cassel Metalshark2 MULTI-FREQUENCY washdown sealed stainless steel conveyorized metal detection system for industrial process applications, with...
~ 10 7/8 inch (275mm) high by 19 11/16 inch (500mm) wide net USEABLE aperture opening with the conveyor belt in place...
~ The 304 stainless steel frame washdown belt transfer conveyor has a 76.5 inch (1943mm) long by 17 5/8 inch (448mm) wide interlocking plastic chain type belt, running at a 30 inch (762mm) working height, with adjustable feet allowing an additional 5 inch (127mm) height adjustment up.
~ The thru-conveyor is complete with a belt-stop alarm reject configuration, and a variable frequency speed control for the 110 volt single phase drive, adjustable from 16 to 75 feet per minute (approximately 5 to 23 meters per minute) belt speed.
~ A food grade metal detector specifically built for food processing and other industrial production line metal detection applications. All food grade / USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65/Nema 4,4x,6,12 & 13 control enclosure).
~ The search head is complete with integral touchpad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.
~ 110 volt single phase (standard household current) electrical input.
~ FOUR FREQUENCY LEVELS (35kHz, 75kHz, 150kHz, and 300kHz), allowing for optimal sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc) allowing for maximum versatility with the widest range of products. The optimal frequency is automatically set by the system in "product learn"mode to maximize sensitivity / minimize false rejects with your specific product.
~ Sensitivity varies depending on product run, and frequency setting (determined by product characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation, however the manufacturer rates dry sensitivity for this head, with no product in the aperture, at a maximum sensitivity of 1.7mm ferrous, 2.3mm non ferrous, and 2.7mm stainless steel at 300 kHz.
~ Quick teach feature learns new products in 4 to 7 passes.
~ The control unit allows for 120 product presets, where product presets save the frequency setting with the other tuning data.
~ Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance expenses.
~ 304 stainless steel search head and conveyor construction.
~ NEW EQUIPMENT - Includes a 2 year manufacturer warranty on hardware / parts.
As of this writing, this food process metal detection system is new IN stock at Alard, available for immediate shipment. Call your Alard Sales Representative at 315-589-4511 to confirm current availability and to discuss your industrial process metal detector need.
Alard item reference #:Y4845