No results.

Industrial Food Processing and Packaging Machines from Alard Equipment Company

Industrial food processing and packaging machine video demonstrations from Alard Equipment Corporation: alard.com

CALL 315-589-4511 to discuss your food process and food packaging equipment needs.

  1. Food grade stainless steel TUMBLE MIXER, barrel mixer, Y5372

    Industrial food grade TUMBLE MIXER, barrel mixer, "cement mixer"...

    ...approximately 100 gallons 13.9 cubic foot capacity. Complete with 3 phase power dump and mixer drives.

    As of this writing, this batch tumble mixer is in stock at Alard Equipment Company, in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your particular food mixing equipment needs.

    Alard item reference #: Y5372

  2. Alard food grade TURBULENT WASHER, Y5113

    Alard TURBULENT IMMERSION WASHER, water-jet agitated wasah flume for leafy greens, pre-cut vegetabes and fresh-cut fruits, food grade stainless steel, Alard item Y5113

    Alard TURBULENT FLOW JET WASHER, leafy green, fruit and vegetable WASHER FLUME, food grade stainless steel...

    An AGITATED IMMERSION WASH SYSTEM, wash and chill flume, with water-jet agitation for gentle but active washing for pre-cut fruits and vegetables, including cut or whole leafy greens, including delicate leaf products like spinach, baby spinach, spring mix and other pre-cut produce food products.

    FEATURES:
    ~ This spiral-flow turbulent immersion washer flume is 11 feet long by 31 inches wide with agitating water jets all along the left-side near the bottom to provide spiral water flow for gentle immersion washing of delicate food products.
    ~ The helical flow wash tank overflows onto a 5 foot long by 30 inch wide ELEVATING DISCHARGE CONVEYOR with an interlocking chain type belt with fine perforations to allow the water to pass through while discharging the dewatered product onward.
    ~ The conveyor is powered by a .5 HP stainless steel shrouded motor with an aluminum body gear reducer.
    ~ The water falls through into a stainless steel catch and balance tank, with a new Thomsen model 8 stainless steel RECIRCULATION PUMP with 7.5 HP motor.
    ~ Check valve included to keep the wash tank water from draining into the wash tank when the pump is shut off.
    ~ All pipe fittings / connections are USDA food-grade sanitary.
    ~ All food-grade sanitary stainless steel construction.
    ~ The water jet nozzles are removable for sanitation.
    ~ All drives 208 / 230 / 460 volt 3 phase electrical input.

    As of this writing, this spiral-flow washer is NEW IN STOCK at Alard, in fully assembled and available for immediate shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your fresh-cut produce packing and process equipment needs.

    Alard item reference #: Y5113

  3. Air injected TURBULENT WASHER for cut produce, Y4500

    IMMERSION WASHER for PRODUCE, with AIR INJECTION for TURBULENT washing, food grade, stainless steel...

    A versatile turbulent washer for almost any pre-cut / fruit or fresh-cut vegetable product with multiple spray bars to motivate product in a downstream direction and air injection for increased removal of bugs, dirt, and other detritus, using ambient or chilled water. This helical washer, with forced air bubbles, is like a gentle Jaccuzi bath for your whole, sliced, diced, fruits and vegetables, and / or leafy vegetables.

    FEATURES:
    ~ 13 foot long by 29 inch wide by 12 inch deep turbulent wash tank, with water jets:
    + Seven (7) forward facing spray nozzles with manual control valve.
    + Six (6) adjustable spray jets with manual control valve.
    + Perforated bottom plates with 3/16 inch perforations to trap sand and fine gravel -- removable for ease of clean-out sanitation..
    + 32 inch high infeed
    + Water recirculation pump powered by 4HP motor.

    ~ AIR AGITATION / INJECTION for increased scrubbing action::
    + Sixteen (16) rows of headers percolate air up through the perforated bottom plates.
    + Manual control valves.
    + Air Blower driven by a 7 HP motor.

    ~ Two (2) 6 inch diameter by 24 inch wide powered poly brushes to increase release of surface debris, insects and other foreign material.
    + Spray bar with five (5) fixed spray nozzles and manual control valve.
    + 1/3 HP chain drive motor.

    ~ Equipped with "bug reel" for scavenging insects and other floating debris from recirculating wash water:
    + 24 inch diameter by 28 inch wide drum with 1/4 inch perforations.
    + 1/3 HP drive motor
    + Reel is hinged for cleaning & sanitation.
    + Collected debris is deposited onto a side overflow tank with removable perforated screens.

    ~ Inline bag filter for removal of fines from water stream.

    ~ Elevating product discharge conveyor with stainless steel wire woven belting:
    + 1.5 inch high flights on 10 inch centers.
    + Four (4) water spray bar headers with a total of fourteen (14) adjustable jets and manual control valve
    + 1 HP drive motor for conveyor.
    + 48 inch discharge height.
    ~ Stainless steel operator control panel.
    ~ All food grade sanitary stainless steel construction.
    ~ 460 volt 3 phase electrical input.

    As of this writing, this air injected immersion jet washer is in stock at ALARD, in VERY GOOD condition and available for timely shipment.

    CALL 315-589-4511 to confirm availability and discuss your industrial food washing needs.

    ALARD item reference #: Y4500

  4. Urschel Comitrol 3640, 40HP, screw feed, Alard item Y5053

    Refurbished Urschel Comitrol 3640, 40HP, with screw auger feed, in stock and available for shipment in excellent operational, mechanical, electrical and operational condition at Alard item Y5053

  5. Breddo Likwifier LIQUEFIER, 125 gallon, 25HP, Y5250

    LIQUEFIER, 125 GALLON, 25HP, USDA dairy grade sanitary stainless steel...

    A Breddo Likwifier 125 gallon square-body single-wall LIQUIFIER, with a 3-phase 25 HP drive. In stock in good operational condition at Alard Equipment Corporation in Williamson, NY, available for immediate shipment; --OR can be cleaned and serviced to EXCELLENT condition for timely shipment, at a nominal extra charge.

    CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

    Alard item reference #: Y5250

  6. VIBRATING SHAKER for dewatering, grading, fines removal, Y5332

    VIBRATING DEWATERING SHAKER, 78x36, food grade, stainless steel...

    A Meyer Model VFIISDC36 vibratory dewatering shaker screen, in food grade
    sanitery stainless steel..

    ~ 78 inches (6.5 feet) long by 36 inches (3 feet) wide.
    ~ 12 inch long rigidized solid infeed section, with dimpled non-stick surface.
    ~ (2) interchangeable 24 inch long full-width wedgewire dewatering screen
    sections, held in by quick release hooks for fast removal for cleaning, or
    replacement with different sieve-size screens.
    + Screen wedges are 1/8 inch wide.
    + Screen sieve openings are 1/16 inch.
    ~ 13 inch long rigidized solid discharge section, with dimpled non stick
    surface.
    ~ (3) 14 inch steps from infeed, to screen level, to discharge.
    ~ Full length bottom catch pan with 6 inch diameter center bottom outlet,
    for grading, fines-removal, and / or dewatering, waste-water recovery, and
    liquid-solids separation applications.
    ~ Slat arms for shaker pan suspension.
    ~ Twin .34HP 3 phase eccentric drives.

    As of this writing, this VIBRATING SHAKER-GRADER is in stock at Alard, in LIKE
    NEW condition, available for immediate shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your particular food
    processing equipment needs.

    Alard item reference #: Y5332