Tenrit Solo C KNIFE PEELER, Y5377
Used Tenrit SOLO C KNIFE PEELER for carrots and other elongated vegetables, in-stock, excellent condition, Alard item Y5377
TENRIT SOLO C KNIFE PEELER for elongated vegetables...
The Tenrit Solo C is a vegetable peeling machine manufacturer recommended for carrots, cucumbers, parsnips, salisfies, and other elongated vegetables, which uses a series of peeling knives to peel these elongated vegetable products at high volume capacities, while simulating the clean, smooth look and texture of hand-peeled product.
The vegetables are hand fed (the machine can also be fed with an optional v-belt, not included) into the feed end through a series of pneumatically sprung side-by-side transport roller pairs which transport the product so that it comes in contact with a series of blades at varying orientations so that the product is completely peeled during it's transit through the machine. The transport rollers and peeling knives flex to conform to the shape of the vegetable passing through the machine.
SPECIFICATIONS – Manufacturer literature rates this machine for...
~ Vegetable diameter from .75 to 2.5 inches (20mm to 65mm).
~ Vegetable length must be 4 inches (100 mm) or longer .
~ Throughput Capacity: Up to 4,000 pieces per hour.
~ Yield loss to peeling: Approximately 10 to 20%.
~ Feed shelf, provides a working surface for aligning and staging product prior to feeding.
~ Semiautomatic – hand feed, the machine does the rest.
~ Knob-adjustable pneumatic pressure regulator for roller tension.
~ Discharge hopper catches peeled product.
~ Peels drop beneath the machine into a full length stainless steel collection-tote on wheels, easily rolls out from under the machine for easy dumping and disposal of peels.
~ Color touch-screen control.
~ All food grade sanitary stainless steel.
~ Safety interlock system on access door, emergency safety stop switch.
~ Portable, on (4) lockable casters.
~ Requires compressed air and 220 volt single phase electrical input.
As of this writing this knive carrot peeler is in stock at Alard, in EXCELLENT operational, mechanical, pneumatic, electrical and cosmetic condition, available for immediate shipment.
CALL 315-589-4511 to confirm availability, and to discuss your fresh-cut vegetable / pre-cut produce processing equipment needs.
Alard item reference #: Y5377
COATING DRUM, seasoning applicator drum, Y4405
Used COATING DRUM, continuous rotary seasoning applicator, food grade, stainless steel continuous tumble mixer; Alard item Y4405.
COATING DRUM, continuous rotary seasoning applicator drum, all stainless steel...
This type of food grade continuous tumble mixer is widely used as a seasoning application system for gently applying dry and liquid spices & flavorings, to a wide variety of food products including potato chips, tortilla chips, crackers, nuts, seeds, snack mixes, popcorn, coffee beans, pet foods / pet snacks, cereals, frozen foods, pasta, and shredded cheeses. The ribbed interior of this seasoning applicator mixing reel allows for the application of vegetable oils, spices, seasonings and flavoring formulations to delicate products with a minimum of product stress or breakage.
~ 30 inch diameter by 66.5 inch long stainless steel coating reel / seasoning drum.
+ 20.75 inch diameter infeed.
+ 27 inch diameter by 5 inch long discharge cone.
+ Sixteen (16) 1 inch high fixed triangle shaped flights.
~ Manually adjustable drum pitch from 3 to 7 degrees.
~ Trunnion drive with centering rollers.
~ All food grade sanitary stainless steel construction.
~ 3 HP stainless steel shrouded drive motor.
~ 208/230/460 volt 3 phase electrical input.
As of this writing, this continuous coating drum is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.
CALL 315-589-4511 to confirm availability and discuss your food processing needs.
ALARD item reference #: Y4405
Food grade stainless steel TUMBLE MIXER, barrel mixer, Y5372
Industrial food grade TUMBLE MIXER, barrel mixer, "cement mixer"...
...approximately 100 gallons 13.9 cubic foot capacity. Complete with 3 phase power dump and mixer drives.
As of this writing, this batch tumble mixer is in stock at Alard Equipment Company, in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.
CALL 315-589-4511 to confirm availability, and to discuss your particular food mixing equipment needs.
Alard item reference #: Y5372
Alard food grade TURBULENT WASHER, Y5113
Alard TURBULENT IMMERSION WASHER, water-jet agitated wasah flume for leafy greens, pre-cut vegetabes and fresh-cut fruits, food grade stainless steel, Alard item Y5113
Alard TURBULENT FLOW JET WASHER, leafy green, fruit and vegetable WASHER FLUME, food grade stainless steel...
An AGITATED IMMERSION WASH SYSTEM, wash and chill flume, with water-jet agitation for gentle but active washing for pre-cut fruits and vegetables, including cut or whole leafy greens, including delicate leaf products like spinach, baby spinach, spring mix and other pre-cut produce food products.
~ This spiral-flow turbulent immersion washer flume is 11 feet long by 31 inches wide with agitating water jets all along the left-side near the bottom to provide spiral water flow for gentle immersion washing of delicate food products.
~ The helical flow wash tank overflows onto a 5 foot long by 30 inch wide ELEVATING DISCHARGE CONVEYOR with an interlocking chain type belt with fine perforations to allow the water to pass through while discharging the dewatered product onward.
~ The conveyor is powered by a .5 HP stainless steel shrouded motor with an aluminum body gear reducer.
~ The water falls through into a stainless steel catch and balance tank, with a new Thomsen model 8 stainless steel RECIRCULATION PUMP with 7.5 HP motor.
~ Check valve included to keep the wash tank water from draining into the wash tank when the pump is shut off.
~ All pipe fittings / connections are USDA food-grade sanitary.
~ All food-grade sanitary stainless steel construction.
~ The water jet nozzles are removable for sanitation.
~ All drives 208 / 230 / 460 volt 3 phase electrical input.
As of this writing, this spiral-flow washer is NEW IN STOCK at Alard, in fully assembled and available for immediate shipment.
CALL 315-589-4511 to confirm availability, and to discuss your fresh-cut produce packing and process equipment needs.
Alard item reference #: Y5113
Air injected TURBULENT WASHER for cut produce, Y4500
IMMERSION WASHER for PRODUCE, with AIR INJECTION for TURBULENT washing, food grade, stainless steel...
A versatile turbulent washer for almost any pre-cut / fruit or fresh-cut vegetable product with multiple spray bars to motivate product in a downstream direction and air injection for increased removal of bugs, dirt, and other detritus, using ambient or chilled water. This helical washer, with forced air bubbles, is like a gentle Jaccuzi bath for your whole, sliced, diced, fruits and vegetables, and / or leafy vegetables.
~ 13 foot long by 29 inch wide by 12 inch deep turbulent wash tank, with water jets:
+ Seven (7) forward facing spray nozzles with manual control valve.
+ Six (6) adjustable spray jets with manual control valve.
+ Perforated bottom plates with 3/16 inch perforations to trap sand and fine gravel -- removable for ease of clean-out sanitation..
+ 32 inch high infeed
+ Water recirculation pump powered by 4HP motor.
~ AIR AGITATION / INJECTION for increased scrubbing action::
+ Sixteen (16) rows of headers percolate air up through the perforated bottom plates.
+ Manual control valves.
+ Air Blower driven by a 7 HP motor.
~ Two (2) 6 inch diameter by 24 inch wide powered poly brushes to increase release of surface debris, insects and other foreign material.
+ Spray bar with five (5) fixed spray nozzles and manual control valve.
+ 1/3 HP chain drive motor.
~ Equipped with "bug reel" for scavenging insects and other floating debris from recirculating wash water:
+ 24 inch diameter by 28 inch wide drum with 1/4 inch perforations.
+ 1/3 HP drive motor
+ Reel is hinged for cleaning & sanitation.
+ Collected debris is deposited onto a side overflow tank with removable perforated screens.
~ Inline bag filter for removal of fines from water stream.
~ Elevating product discharge conveyor with stainless steel wire woven belting:
+ 1.5 inch high flights on 10 inch centers.
+ Four (4) water spray bar headers with a total of fourteen (14) adjustable jets and manual control valve
+ 1 HP drive motor for conveyor.
+ 48 inch discharge height.
~ Stainless steel operator control panel.
~ All food grade sanitary stainless steel construction.
~ 460 volt 3 phase electrical input.
As of this writing, this air injected immersion jet washer is in stock at ALARD, in VERY GOOD condition and available for timely shipment.
CALL 315-589-4511 to confirm availability and discuss your industrial food washing needs.
ALARD item reference #: Y4500
Urschel Comitrol 3640, 40HP, screw feed, Alard item Y5053
Refurbished Urschel Comitrol 3640, 40HP, with screw auger feed, in stock and available for shipment in excellent operational, mechanical, electrical and operational condition at Alard item Y5053