No results.

FRESHCUT produce processing equipment,.

Video portfolio of new, reconditioned, and used food processing and packaging equipment for fresh-cut and pre-cut vegetable and fruit fresh processing and packaging applications; from Alard Equipment Corporation.

For ALL our online listings of IN-STOCK pre-cut produce and fresh-cut food processing and packing equipment,
SEE: alard-equipment.com/freshcut/freshlistings.htm OR...

...CALL 315-589-4511 to discuss YOUR particular industrial fruit and vegetable processing and packing equipment needs.

  1. Commercial NS26 SLICER, shredder Y4497

    Used Commercial NS-26 cabbage and lettuce shredder for coleslaw,sauerkraut and sandwich shreds, Alard item Y4497

    COMMERCIAL CABBAGE CUTTER, 26 INCH, industrial-capacity food grade stainless steel vegetable SLICER / SHREDDER / STRIP CUTTER...

    A Commercial Slicer Model 26NS, also known as a "Waterfall" slicer or Kibbey cutter, has long been the mainstay of the coleslaw and sauerkraut industries. Manufacturer recommended for lettuce, cabbage, onions, peppers, cucumbers, potatoes,carrots, tomatoes and celery...

    FEATURING:
    ~ 26 inch diameter aluminum frame cutting disk with stainless steel knives; 100% cutting surface.
    ~ "Three cup" counter-rotating aluminum carrying arm pusher-plow to prevent rolling and maximize throughput capacity.
    ~ Open infeed to easily accept heads of cabbage, lettuce and other whole vegetable products (up to 9 inch diameter).
    ~ Manufacturer rated for up to 25,000 pounds per hour, depending on cut size and product.
    ~ A range of cutting disk and blade configurations are available for one and two-dimensional cutting (slices, strip cuts, julienne cuts) in thicknesses from 1/32 to 2 inch and up to 5 inch in length. Grater blades are also available forshredding carrots, slaw, onions, and other fresh vegetables. CALL 315-589-4511 to discuss your particular industrial food process vegetable cutting / cut size specification.
    ~ Food grade stainless steel construction, including tubular stainless steel frame, with 52 inch infeed height and 19.5 inch high discharge and funneled discharge with 24 inch by 24 inch discharge opening.
    ~ Complete with two (2) 1.5HP gear motor drives - one for main cutting wheel and the other powers plow.
    ~ 230/460 volt 3 phase electrical input.

    As of this writing this high-capacity industrial slicing and strip cutting machine is in stock at ALARD, in good condition, available for timely shipment.

    CALL 315-589-4511 to confirm availability and discuss your food process fruit and vegetable slicing and strip cutting needs.

    ALARD item reference #: Y4497

  2. Bock FP-95 SPIN DRYER, like new, Y4533

    Bock North Star FP95 CENTRIFUGE 130 lb batch SPIN DRYER, Alard item Y4533

    BOCK SPIN DRYER MODEL FP95 CENTRIFUGE...

    A like-new Bock / North Star Engineered Products FP-95 CENTRIFUGE, food-grade batch centrifugal system with a manufacturer rated capacity of up to 1,950 lbs per hour. This industrial salad-spinner is an industry-standard tool for spin drying and dewatering of fresh-cut produce products for pre-cut produce packing applications...

    FEATURES:

    ~ 30 inch diameter by 18 inch deep basket manufacturer rated for 130 lbs capacity, with lifting yoke and basket dolly included.
    ~ Pneumatic self-raising lid for ease of operation.
    ~ Safety lid interlock system prevents opening until cycle is complete and basket is stopped.
    ~ All food grade stainless steel construction including support base, heavy-duty build.
    ~ Gasketed stainless steel factory remote control box with electrical controls including timer, programmable variable speed controller, and electronic braking system.
    ~ 460 volt 3 phase electrical input, and 6-80 psi / 2cfm compressed air.
    ~ 7.5 HP 3 phase drive motor.
    ~ We received this machine in the original factory crate, the prior owner having kept it in storage for several years but never used it.

    As of this writing, this unused Bock spinner is in stock in LIKE NEW operational, electrical, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your particular pre-cut produce packing equipment needs.

    Alard item reference #:Y4533

  3. Kronen SPIN DRYER, light plastic basket, Y4424

    Used Kronen SPIN DRYER, model KS-50 ECO plastic basket dewatering centrifuge, Alard item Y4424

    KRONEN MODEL K50-7 ECO SPIN DRYER, with PLASTIC BASKETS...

    A compact food grade centrifugal dryer, with Kronen engineered quality construction, for fresh Produce processing plants and other similar institutional and industrial food applications. Uses light plastic baskets which can be inserted and removed by hand; without need of an overhead winch. Ideal for dewatering fresh-cut vegetable products after washing, in the context of industrial produce packing and fresh-cut processing operations producing bagged salads, packaged fruits, herbs, shredded lettuce, chopped greens and other leafy or shredded vegetable products.

    FEATURES:
    ~ Uses a 1.5 cubic foot (11.5 gallon capacity), 16.5 inch top diameter by 14 inch deep, perforated plastic baskets.
    + Light plastic dryer basket can be placed, removed and dumped by hand without aid of an overhead hoist or other apparatus.
    + Basket size easily fits under cutting machines, dewatering shakers and other upstream sources.
    + TWELVE (12) plastic dryer baskets included.
    ~ Manufacturer rated for up to 22 lb (10 kg) load capacity.
    ~ Capable of spinning from 250 to 850 rpm.
    ~ 30 inch working height with adjustable threaded-rod legs.
    ~ FDA approved food grade sanitary stainless steel construction with plastic lid.
    ~ Operator controls include ON/OFF, seven (7) speed settings and adjustable timer.
    ~ 1HP (.75 kW) drive motor.
    ~ 220 volt single phase electrical input.
    ~ Apparently shares appearances and features with the Kronen KS-7 ECO spinner.

    As of this writing, this Kronen K50-7 ECO salad spinner is in-stock in at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

    CALL 315-589-4511 for availability and discuss your precut produce packing equipment needs.

    ALARD item reference #: Y4424

  4. Urschel Comitrol Processor model 3640S, Alard item Y4289

    URSCHEL COMITROL PROCESSOR Slant model 3640, 40HP....

    A compact Comitrol mill for small volume to high capacity production operations. Widely used for rework of gelatin capsules, biscuits, candy, noodles and a full spectrum of bakery goods. Also manufacturer recommended for reducing meats, fish, textured vegetable protein, fruits, vegetables, spices, seaweed, cheeses, chemical and pharmaceutical applications.

    FEATURES:

    ~ Tapered infeed hopper 8.5 inches front-to-back by 12 inches wide and 18 inches deep.
    ~ Existing 3 inch cutting head with Diocut impeller included, manufacturer offers a wide range of cutting heads and impellers for particle sizes ranging from coarse to fine emulsions /powders / granules. CALL 315-589-4511 to discuss your cutting specification.
    ~ Cutting chamber / cutting head mounted at a slanted angle to facilitate product in-feed.
    ~ Continuous operation for uninterrupted production.
    ~ Designed for easy cleanup and operation.
    ~ Food grade sanitary stainless steel product contact surfaces and support frame construction.
    ~ Gasketed stainless steel electrical and operator control boxes, with safety interlock system.
    ~ 40 HP with variable speed brakemotor drive controller with 460 volt 3 phase electrical input.

    As of this writing, this Urschel Comitrol 3640 milling machine is in stock at Alard in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your particular food processing milling and cutting equipment needs.

    Alard item reference #:Y4289

  5. Grove Dale FlightFeeder step-feeder-aligner-length cutter Y4316

    STEP FEEDER with INCREMENT CUTTER, all stainless steel...

    A Grove Dale Corporation FliteFeeder elongated-product aligner with powered circular-knife length-cutter, is designed to supply a consistent flow of product spread across the width of the steps for cutting elongated vegetables such as carrots, celery, zucchini, etc. into set lengths / increments. With each stroke the feeder automatically shuffles & indexes food product into perpendicular-to-flow alignment prior to being precision fed into the increment cutter knives...

    FEATURES:
    ~ 55 inch wide by 6 foor long bed.
    ~ 1.75 inch deep steps with 7.5 inch vertical push.
    ~ 30 inch infeed height, 49 inch high discharge.
    ~ Increment cutter is currently set with 1.5 inch spacing and 10 inch diameter circular blades.
    ~ All food grade sanitary stainless steel.
    ~ 1.5 HP stainless steel drive motor.
    ~ Similar to a Magnuson Shufflo cutter, this GDC “Flight-Feeder” aligner-feeder-cutter, is frequently used in conjuction with the Grove Dale TROUGH BELT speed-up belt-feeder (not included but available separately as of this writing, call 315-589-4511 to confirm current availability). The combination aligner-feeder with V-belt takeaway is in turn commonly used to feed downstream equipment, such as an URSCHEL VSC segment cutter (not included but available separately as of this writing, call 315-589-4511 to confirm current availability) for wedge, spear, stick, strip, or slab cuts,, or an Urschel OV slicer (not included but available separately as of this writing, call 315-589-4511 to confirm current availability) for fine coin cuts.

    As of this writing, this Shufflo-style feeder is in stock at ALARD, in process in our shop being serviced to EXCELLENT operational, mechanical & electrical condition, is close to completion and available for timely shipment.

    CALL 315-589-4511 to confirm availability and discuss your food aligner-feeder needs.

    ALARD item reference #: Y4316

  6. Dunkley ROD-BELT CONVEYOR, Y4584

    ROD BELT CONVEYOR, FOOD GRADE STAINLESS STEEL, 72x15...

    A 6 foot long by 15 inch wide rod belt Dunkley takeaway conveyor, previously used with a Dunkley Cherry pitter (available separately) to conveyor pitted cherries away from the pitting machine, with belt spacing to allow any loose pits to drop through. Ideal for it's original purpose, but could as well be used as a cleaning / grading conveyor (which would allow fines to drop through), a feed conveyor, takeaway conveyor, or transfer conveyor for a wide range of raw, peeled, or cut fruits and vegetables, and/or packaged food products in a pre-cut produce packing or other industrial food manufacturing process environment.

    FEATURING:

    ~ 72 inch long by 15 inch stainless steel rod belt, with 3/16 inch rods on spacings allowing for 3/8 inch openings. The conveyor did not / does not come with any bottom catch pan.
    ~ The belt runs between stainless steel sides that flare out to a width of 20.5 inches.
    ~ All food grade stainless steel construction, with corrosion resistant plastic bearing blocks, 4 inch diameter plastic belt pullies, and stainless steel shafts.
    ~ Fractional HP 208/230/460v 3 phase drive 1725 RPM drive with 50:1 gear reducer.
    ~ Did not come with, does not include legs, but we can fabricate legs to buyer specification at extra charge. Can be configured as an elevating conveyor, horizontal conveyor, or lowerating conveyor, per customer requirement. CALL 315-589-4511 to discuss your bulk food product handling needs.

    As of this writing, we have this stainless steel rod-belt conveyor in stock in EXCELLENT operational, mechanical and cosmetic condition, available for immediate shipment.

    Also at the time this is written, we have multiple Dunkley cherry pitting machines and multiple Dunkley cherry-pitter takeaway conveyors; CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

    Alard item reference #:Y4584