No results.

FRESHCUT produce processing equipment,.

Video portfolio of new, reconditioned, and used food processing and packaging equipment for fresh-cut and pre-cut vegetable and fruit fresh processing and packaging applications; from Alard Equipment Corporation.

For ALL our online listings of IN-STOCK pre-cut produce and fresh-cut food processing and packing equipment,
SEE: alard-equipment.com/freshcut/freshlistings.htm OR...

...CALL 315-589-4511 to discuss YOUR particular industrial fruit and vegetable processing and packing equipment needs.

  1. NBE BIN DUMPER, Alard item Y4828

    NBE BIN DUMPER, Alard item Y4828

    A used National Bulk Equipment hydraulic bin dumper / tote dumper for 40 by 40 or 48 by 38 bins, totes, gaylords, boxes,toters, crates, etc. Stainless steel bin holder. Complete with onboard hydraulic pack. As of this video, this crate dumper is in stock at Alard Equipment Corp in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your particular bulk food product handling equipment needs.

    Alard item reference #: Y4828

  2. Alard Turbulent Flow Jet Washer Y4262

    Alard TURBULENT FLOW JET WASHER, leafy green, fruit and vegetable WASHER FLUME, food grade stainless steel...

    An AGITATED IMMERSION WASH SYSTEM, wash and chill flume, with water-jet agitation for gentle but active washing for pre-cut fruits and vegetables, including cut or whole leafy greens, including delicate leaf products like spinach, baby spinach, spring mix and other pre-cut produce food products.

    FEATURES:
    ~ This spiral-flow WASH FLUME is 11 feet long by 31 inches wide with agitating water jets all along the left-side near the bottom to provide spiral water flow for gentle immersion washing of delicate food products.
    ~ The wash tank overflows onto a 5 foot long by 30 inch wide ELEVATING DISCHARGE CONVEYOR with an interlocking chain type belt with fine perforations to allow the water to pass through while discharging the dewatered product onward.
    ~ The conveyor is powered by a .5 HP stainless steel shrounded motor with an aluminum shrouded gear reducer.
    ~ The water falls through into a stainless steel catch and balance tank, with a new Thomsen model 8 stainless steel RECIRCULATION PUMP with 7.5 HP motor.
    ~ Check valve included to keep the wash tank water from draining into the wash tank when the pump is shut off.
    ~ All pipe fittings / connections are USDA food-grade sanitary.
    ~ All food-grade sanitary stainless steel construction.
    ~ The water jet nozzles are removable for sanitation.
    ~ All drives 208/230/460 volt 3 phase electrical input.

    As of this writing, this spiral-flow washer is NEW IN STOCK at Alard, in fully assembled and available for immediate shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your fresh-cut produce packing and process equipment needs.

    Alard item reference #: Y4262

  3. Food METAL DETECTOR with conveyor belt, 20x8, Cassel Metalshark, Y4768

    FOOD PROCESS METAL DETECTOR with BELT CONVEYOR, 21x8, 304 stainless steel...

    A Cassel Metalshark2 MULTI-FREQUENCY washdown sealed 304 stainless steel conveyorized metal detection system for industrial process applications, with...

    ~ Approximately 8 inch (203mm) high by 20.6 inch (525mm) wide net USABLE aperture opening with the conveyor belt in place.

    ~ The 304 stainless steel frame washdown belt transfer conveyor has a 70.5 inch (1791mm) long by 18.5 inch (470mm) wide interlocking plastic chain type belt, running at a 31.5 inch (800mm) working height, with adjustable feet allowing +/-4 inch (100mm) height adjustment.

    ~ The thru-conveyor is complete with a photo-eye product sensor, a belt-stop alarm reject configuration, and a variable speed control for the 110 volt single phase drive, adjust able from 16 to 75 feet per minute (approximately 5 to 23 meters per minute) belt speed.

    ~ A food grade metal detector specifically built for food processing and other industrial production line metal detection applications. All food grade / USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65/Nema4,4x,6,12 & 13 control enclosure).

    ~ The search head is complete with integral touchpad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.

    ~ 110 volt single phase (standard household current) electrical input.

    ~ FOUR FREQUENCY LEVELS (35kHz, 75kHz, 150kHz, and 300kHz), allowing for optimal
    sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc) allowing for maximum versatility with the widest range of products. The optimal frequency is automatically set by the system in "product learn" mode to maximize sensitivity / minimize false rejects with your specific product.

    ~ Sensitivity varies depending on product run, and frequency setting (determined by product characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation.

    ~ Quick teach feature learns new products in 4 to 7 passes.

    ~ The control unit allows for 120 product presets, where product presets save the frequency setting with the other tuning data.

    ~ Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance expenses.

    ~ 304 stainless steel search head and conveyor construction.

    ~ NEW EQUIPMENT - Includes a 2 year manufacturer warranty on hardware / parts.

    As of this writing, this conveyorized metal detection system is in stock NEW at Alard, ready to go and available for immediate shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your particular industrial product inspection needs.

    Alard item reference #:Y4768

  4. 6-inch pipeline metal detector, washdown, stainless steel Y4816

    INLINE METAL DETECTOR, 6 inch pipeline, with reject valve, all stainless steel USDA food grade sanitary, IP-66 washdown, Alard item Y4816

    CASSEL PIPELINE METAL DETECTOR, with 6 inch tube, automatic reject valve, food grade sanitary stainless steel...

    A stainless steel Cassel inline metal detector with pneumatic divert valve for pumped food products including meats, patees, sauces, pastes, slurries, creams, oils, purees, salsa, refried beans, wet salads, and other viscous or liquid food products hot or cold. Also useful for vacuum packed applications where product is pumped to avoid oxidation. For food safety metal detection on food products as they travel through process pipelines.

    FEATURES:

    ~ Has 6 inch diameter by 36 inch long anti-static UHMW plastic through-tube running through an 8 inch diameter opening in the metal detection sensor-head.
    ~ All USDA sanitary thread inlet/outlet connections / fittings.
    ~ Pneumatic ball valve reject -- straight-through good product discharge, down-facing reject discharge.
    ~ Cord connected factory control box rated for IP66 pressure hose WASH-DOWN applications.
    ~ Digital touch-pad operator controls.
    ~ All food grade sanitary stainless steel construction.
    ~ Metal detection head, divert valve & control panel mounted together on a common stainless steel frame.
    ~ 110 volt single phase (standard household current) electrical input.
    ~ Compressed air required for automatic reject valve.

    As of this writing, this industrial food process pipeline metal detector is in stock at ALARD, in EXCELLENT operational, electrical & cosmetic condition, availa ble for immediate shipment as configured.

    CALL 315-589-4511 to confirm availability and discuss your food process metal detection needs.

    ALARD item reference #: Y4816

  5. DEWATERING SHAKER, aligner, feeder, Alard Y4690

    VIBRATING DEWATERING SHAKER, aligner, even-feeder, 10 feet long 3 feet wide, food grade stainless steel, Alard item Y4600

    BRUYNOOGHE VIBRATORY ALIGNING FEED CONVEYOR, dewatering shaker, 118x39, stainless steel...

    A Bruynooghe shaker aligner, four deck / three step dewatering screen and vibrating feeder, orients elongated fruit & vegetable products into a single direction. An aligning feeder for food products such as green beans, carrots, peppers, pickles, cucumbers, celery, zucchini, leeks, french fries and other strip cuts, stick cuts and more...

    FEATURING:
    ~ 39 inch wide by 118 inch (9 feet 10 inches) long shaker bed currently configured with...
    + Fixed 13.75 inch long solid infeed section.
    + Three (3) removable / replaceable screen sections:
    ++ 19.25 inch long each.
    ++ 1/8 inch rods and 3mm sieves -- rods are inline with flow.
    ++ 1/4 inch step down between each screen section.
    + 3 inch drop to 40-inch-long six (6) lane ALIGNER SECTION with....
    ++ Four (4) individual 1.25 wide aligners per lane..
    ++ Last 8 inch is angled down to more gently convey product downstream.
    ~ 42 inch high infeed, 32.5 inch discharge height
    ~ All food grade sanitary stainless steel construction.
    ~ Vibratory action provided by two (2) 2.5 HP rotary / eccentric vibrator motors .
    ~ 3 phase electrical input.

    As of this writing, this vibrating shaker/aligner is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

    CALL 315-589-4511 to confirm availability and discuss your food handling needs.

    ALARD item reference #: Y4690

  6. Alard peeler-feed conveyor Y4685 with Alard pickle washer brush washer Y4727

    ALARD ELEVATING BELT CONVEYOR / ELEVATING FEED CONVEYOR with HOPPER, 12 inch wide, food grade, stainless steel, cleated belt...

    The Alard cleated belt PEELER-FEED CONVEYOR, was designed to consistently even feed fruit and vegetable products including apples, beets, carrots, cucumbers, potatoes, onions, beets and other root crop vegetables into an Alard peeling machine, or other downstream food processing or packaging equipment. This incline feed conveyor with tapered in-feed hopper is configured at an optimal discharge height for feeding an ALARD 4-roll pickle washer, scrubber, abrasive peeler / brush washer (not included)...

    FEATURES:
    ~ 32 inch wide by 16 inch long tapered stainless steel feed hopper.
    ~ 12 inch wide by 8.5 foot long cleated incline belt.
    ~ Cleated belt with 2 inch high cleats on 6 inch centers.
    ~ The belt runs between 7.5 inch high sides flared to 17 inches wide at the tops.
    ~ 33 inch infeed height, 53 inch high discharge with discharge chute.
    ~ All food grade sanitary stainless steel construction.
    ~ Top mounted 1 HP drive motor.
    ~ 208 / 230 / 460 volt 3 phase electrical input. Variable speed controller available at extra charge (Call 315-589-4511 to discuss your food process feed conveyor requirements).

    As of this writing, this elevating belt conveyor is NEW in stock at ALARD, available for immediate shipment.

    CALL 315-589-4511 to confirm availability and discuss your industrial food processing and packaging bulk food handling needs.

    ALARD item reference #: Y4685

    FOUR ROLL BRUSH WASHER / PICKLE-WASHER / SCRUBBER for pickles, cucumbers, and other fruits and vegetables, stainless steel, in-stock NEW...

    A versatile washer for fresh pack pickles, brine stock, beets, potatoes, carrots, and other similar vegetables. With brushes this continuous four roll brush-washing scrubbing and/or pickle washing machine. It can also be fitted with any combination of brushes and/or abrasive rolls for peeling, brush washing, scrubbing, or finishing (e.g. in combination with another peeler, scrubber, or steam peeler) of fruits and vegetables such as potatoes, beets, carrots, onions, cucumbers, pickles, apples, oranges and other raw fresh produce items.

    OPERATION:
    Raw product is continuously fed to the brush-washing / peeling chamber and subjected to the spinning rolls (abrasive and/or brushes as the case may be). It is important that a sufficient amount of product be kept in the peeling chamber during operation for best results. Lubricating and rinsing action is provided in the chamber by overhead sprays, while the flow of product through the machine is regulated both by a weighted discharge door, and the inclination of the machine. The water spray, rotating brushes and friction of the products rubbing against each other tumble and turn the product so that it is thoroughly scrubbed from every conceivable angle.

    FEATURES:
    ~ 15 inch by 27 inch top hopper inlet opening in the hinged stainless steel cover at 57 inch infeed height.
    ~ Currently configured with four (4) hex-pex black poly brush rolls useful for is ideal for removing pickle nodes, pickle thorns or pickle hair removel, as well as other washing, scrubbing, and finishing applications. Can be set up with any combination of abrasive or brush rolls to buyer need / specification for stronger or gentler peeling, scrubbing, action. Call 315-589-4511 to discuss your particular scrubber, washer, peeler application.
    ~ Each spinning roll is 6 inches in diameter by 6 foot long.
    ~ Lubricating and rinsing action is provided in the chamber via a stainless steel water spray pipe header with spray nozzles.
    ~ Peeled product discharges through a stainless steel discharge flapper-gate which is adjustable so product can be subjected to a longer or shorter peeler /washing exposure; --at a 39 inch discharge height.
    ~ Water, dirt, stems, leaves, peels, and other debris drop to a full length stainless steel water catch pan with a 6 inch by 6 inch center bottom outlet. We recommend an Alardsieve water filter to remove debris so your washwater can be reused. Call 315-589-4511 to discuss your water reclaim screen requirements.
    ~ Capacities run in the ton-per-hour range more or less, depending on product and application (peeling, washing) and the degree of finish desired.
    ~ The abrasive brush rolls are mounted parallel (in-line) with product flow.
    ~ Complete with central lubrication cluster for ease of maintenance.
    ~ Chain / sprocket drive powered by a 3HP 208/230/460 volt 3 phase 60 cycle constant speed motor.
    ~ We recommend an optional "soft start" variable speed controller in a gasketed PVC NEMA 4 control box. Call 315-589-4511 for pricing.

    As of this writing, ALARD EQUIPMENT has this model available NEW in stock and available for immediate shipment.

    CALL 315-589-4511 to confirm availability and discuss your particular fruit and/
    or vegetable peeling and washing equipment need.

    ALARD item reference #: Y4727