No results.

FRESHCUT produce processing equipment,.

Video portfolio of new, reconditioned, and used food processing and packaging equipment for fresh-cut and pre-cut vegetable and fruit fresh processing and packaging applications; from Alard Equipment Corporation.

For ALL our online listings of IN-STOCK pre-cut produce and fresh-cut food processing and packing equipment,
SEE: alard-equipment.com/freshcut/freshlistings.htm OR...

...CALL 315-589-4511 to discuss YOUR particular industrial fruit and vegetable processing and packing equipment needs.

  1. New in stock FOOD PROCESS METAL DETECTOR with conveyor 20x11 Y4845

    New in stock FOOD PROCESS METAL DETECTOR with conveyor belt, 20x11, Cassel Metalshark2, Alard item Y4845

    FOOD PROCESS METAL DETECTOR with BELT CONVEYOR, 20x12, stainless steel...

    A Cassel Metalshark2 MULTI-FREQUENCY washdown sealed stainless steel conveyorized metal detection system for industrial process applications, with...

    ~ 10 7/8 inch (275mm) high by 19 11/16 inch (500mm) wide net USEABLE aperture opening with the conveyor belt in place...

    ~ The 304 stainless steel frame washdown belt transfer conveyor has a 76.5 inch (1943mm) long by 17 5/8 inch (448mm) wide interlocking plastic chain type belt, running at a 30 inch (762mm) working height, with adjustable feet allowing an additional 5 inch (127mm) height adjustment up.

    ~ The thru-conveyor is complete with a belt-stop alarm reject configuration, and a variable frequency speed control for the 110 volt single phase drive, adjustable from 16 to 75 feet per minute (approximately 5 to 23 meters per minute) belt speed.

    ~ A food grade metal detector specifically built for food processing and other industrial production line metal detection applications. All food grade / USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65/Nema 4,4x,6,12 & 13 control enclosure).

    ~ The search head is complete with integral touchpad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.

    ~ 110 volt single phase (standard household current) electrical input.

    ~ FOUR FREQUENCY LEVELS (35kHz, 75kHz, 150kHz, and 300kHz), allowing for optimal sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc) allowing for maximum versatility with the widest range of products. The optimal frequency is automatically set by the system in "product learn"mode to maximize sensitivity / minimize false rejects with your specific product.

    ~ Sensitivity varies depending on product run, and frequency setting (determined by product characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation, however the manufacturer rates dry sensitivity for this head, with no product in the aperture, at a maximum sensitivity of 1.7mm ferrous, 2.3mm non ferrous, and 2.7mm stainless steel at 300 kHz.

    ~ Quick teach feature learns new products in 4 to 7 passes.

    ~ The control unit allows for 120 product presets, where product presets save the frequency setting with the other tuning data.

    ~ Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance expenses.

    ~ 304 stainless steel search head and conveyor construction.

    ~ NEW EQUIPMENT - Includes a 2 year manufacturer warranty on hardware / parts.

    As of this writing, this food process metal detection system is new IN stock at Alard, available for immediate shipment. Call your Alard Sales Representative at 315-589-4511 to confirm current availability and to discuss your industrial process metal detector need.

    Alard item reference #:Y4845

  2. PND SS8 STICK-MAKER, Wedger, Slab Cutter, Y4972

  3. GARLIC PEELING LINE Y4912

    Used GARLIC PEELING LINE, like new condition, in stock at Alard, item Y4912

    A J.J. BROCH (Spain) garlic peeling line including feeder, splitter, inspection conveyors and peeler collection boxes manufacturer rated for 1,000 pounds-per-hour finished production...

    FEATURES:

    INFEED HOPPER:

    70 inch by 70 inch by 26 inch deep hopper.

    Hopper tapers to 11.5 inch square center bottom outlet with discharge chute.

    50 inch high infeed.

    Adjustable height legs.

    Painted steel construction.

    ELEVATING BELT CONVEYOR:

    Bottom end fits the discharge chute of the INFEED HOPPER.

    12 inch wide by 105 inch long black rubber belt with 1 inch high cleats on 12 inch centers.

    70 inch high discharge with adjustable height feet.

    Painted mild steel construction.

    GARLIC CRACKER / SPLITTER:

    Whole garlic is top fed into a series of brushes and dual belt cracking system.

    Top mounted blower to exhaust chaff.

    Cracked / split cloves are discharged at 43 inch high.

    Equipped with operator control panel.

    Painted mild steel construction.

    SORTING / MANUAL CRACKING CONVEYOR:

    22 inch wide by 112 inch long black rubber belt.

    Center/overhead light.

    42 inch working height.

    Painted mild steel construction.

    SORTING / MANUAL CRACKING CONVEYOR:

    22 inch wide by 112 inch long black rubber belt.

    Center/ overhead light.

    Blower hood, with adjustable louver, vacuums away garlic skins only.

    36 inch working height.

    Painted mild steel construction.

    HOPPER / ELEVATING CONVEYOR:

    Cloves from SORTING CONVEYOR deposit into 31 inch wide by 40 inch long hopper.

    31 inch wide by 120 inch long rubber belt with 1.5 inch high cleats on 4 inch centers.

    All food grade sanitary stainless steel construction.

    Discharges into the PEELER...

    GARLIC PEELER:

    Cracked/split cloves drop onto a 33 inch wide rubber belt with 1.5 high cleats on 4 inch centers inside the chamber.

    A traveling head moves back & forth directly over the cleats and blows high pressure air into the belt pockets.

    Top mounted fan vacuums debris from the belt pockets at the discharge end of the peeler.

    Under the main belt is another 46 inch wide rubber belt to collect debris -- this belt travels in the opposite direction and deposits debris to the infeed end of the peeler.

    FINAL INSPECTION CONVEYOR:

    40 inch wide by 19 foot long flat rubber belt with 3.5 inch high tapered sides.

    Top center mounted lights.

    36 inch working height.

    All food grade sanitary stainless steel construction.

    WASH TANK / BATH:

    42 inch wide by 20 inch tapered hopper feeds a 16 inch wide perforated plastic belt with 2 inch high cleats on 12 inch centers.

    Belt travels 90 inches horizontally through a liquid filled area which then inclines for 60 inches to drain.

    Cloves are discharged by a chute at 44 inches high.

    Conveyor lifts out via pneumatic cylinders for ease of cleaning & maintenance.

    All food grade sanitary stainless steel construction.

    DRYER:

    16 inch wide by 108 inch long perforated plastic belt with 2 inch high cleats on 10 inch centers.

    Dual overhead blowers for drying cloves.

    Control panel for all "PEEL LINE COMPONENTS" with speed controls.

    Peeled garlic discharges at 37 inch high.

    WASTE COLLECTION CONTAINERS (2):

    One is used to accept skins/debris from CRACKING Portion, Other is for PEELING Portion.

    81 inch long by 81 inch wide by 85 inch high.

    Designed to be lifted by a forklift and positioned over a dumpster.

    Manual lever to open hinged bottom panels to completely dump all contents from bin / container.

    460 volt 3 phase and 110 volt single phase (standard household current) electrical inputs.

    As of this writing, this garlic cracking line / garlic peeling line is in stock at ALARD, in LIKE NEW condition and available for immediate shipment.

    CALL 315-589-4511 to confirm availability and discuss your food processing needs.

    ALARD item reference #: Y4912

  4. BATCH VEGETABLE PEELER, Flott ZS-25, Y4149

    Used Flott onion peeler, garlic peeler, potato, carrot, and batch vegetable peeler, Model ZS25, Alard item Y4149

    Flott onion, garlic, potato, carrot, and vegetable peeler, Model ZS25 BATCH PEELER...

    An abrasive batch peeling machine manufacturer recommended for garlic, onion, potatoes, carrots, beets, and other root crop vegetables with up to 1,760 pounds per hour capacity. Peeling action takes place at the bottom and sides of the machine which offers delicate peeling action, low noise cycles and reduced water consumption...

    FEATURING:
    ~ Load capacities per manufacturer literature:
    + Root Crops (potatoes, carrots, beets, etc): up to: 66 lbs (33 kg) per batch with an hourly throughput of 1,760 lbs (800 kg).
    + Onions: 55 lbs (20 kg) per batch with an hourly throughput of 1,320 lbs (600 kg).
    + Garlic: 44 lbs(20 kg) per batch with an hourly throughput of 1,100 lbs (500kg).
    ~ Peeling chamber measures 21.5 inch diameter by 14.5 inch deep with abrasive side panel and rotating abrasive bottom disk.
    ~ Side panel and bottom disk inserts can be changed depending on the product and type peeling desired.
    ~ 47 inch infeed height.
    ~ Water spray system assists with washing and removing peels.
    ~ Finished product is discharged thru a 10 inch diameter door with chute. Peels, debris & water have their own separate side discharge.
    ~ Hinged top cover with clear plexiglass center and safety interlock switch.
    ~ Equipped with start/stop controls and 6 minute timer.
    ~ 230 volt 3 phase electrical input.
    ~ Comes with three (3) interchangeable abrasive side panel peeling inserts and one (1) smooth insert designed for gentle washing.

    As of this writing, this peeler is in stock at ALARD, in EXCELLENT operational, mechanical, electrical and cosmetic condition, ready to go and available for immediate shipment.

    CALL 315-589-4511 to confirm availability and discuss your food processing needs.

    ALARD item reference #: Y4149

  5. CMI vegetable DIP TANK, WASHER, RINSER Y4896

    CMI DIP TANK, WASHER, RINSER, fruit and vegetable preservative solution application tank, food grade, stainless steel. Complete with stainless steel recirculation pump, full length cleated elevating discharge conveyor with drive. Pneumatic power assist conveyor lift-out for sanitation / cleaning.

    As of this writing, this fruit and vegetable dip tank washer is in stock at Alard Equipment in very good operational condition, available for immediate shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

    Alard item Ref.#Y4896

  6. Urschel M6 DICER, dicing HAM, Alard item Y4639

    Urschel Model M6 DICER cutting ham, dicing ham...

    URSCHEL MODEL M6 DICER...

    A two-dimensional vegetable and meat cutter designed for dicing, strip cutting, or shredding a variety of products through a wide range of sizes. This versatile dicing machine, strip-cutter, and shredder is ideally suited for cutting beef, pork, poultry or fish through a wide temperature range from fresh chilled to hot cooked. Also manufacturer recommended as a leafy greens chopper for collard greens, kale, leeks, mustard greens, and spinach. This versatile machine is also recommended for cutting other food products into strips or squares including fruit leathers, flat breads, tortillas, pita chips, brownies, and croutons. This is a high-volume cutting machine that operates continuously at high production capacities, and is designed for easy cleanup and maintenance.

    Manufacturer SPECIFICATIONS:

    ~ Infeed thickness of up to 1 inch (25.4mm).
    ~ Circular knife cuts from 3/16 to 1.5 inches (4.8mm to 38mm).
    ~ Crosscut knife cuts from 1/8 inch to 3 inches (3.2mm to 76.2mm).
    ~ STRIP CUTS can be made by removing the crosscut knife spindle. The length and thickness of the strips will depend on the size of the original product.
    ~ SHREDS - many types available for applications such as cooked pork, cooked beef, or cooked chicken, in medium, long or fine shreds.

    FEATURES:
    ~ This machine comes with 1/4 inch feed drum, and a 3/4 inch crosscut spindle. Circular knife spindle spacings can be easily adjusted in increments 1/4”. Other cutting parts are available from the manufacturer: --CALL 315-589-4511 to discusss your particular cutting specifications.
    ~ 10 inch wide feed belt with 35 inch length of open belt-feed area..
    ~ Includes factory stainless steel operator control panel with safety interlock system.
    ~ USDA food grade construction, including stainless steel cutting spindles, tubular support frame, guards, shrouds, infeed hopper and discharge chute.
    ~ 5 HP 208 / 230 / 460 volt 3 phase drive motor.

    As of this writing, this Urschel M6 DICER is available in stock at Alard, in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for timely shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food processing cutting equipment needs.

    Alard item reference #:Y4639