No results.

FRESHCUT produce processing equipment,.

Video portfolio of new, reconditioned, and used food processing and packaging equipment for fresh-cut and pre-cut vegetable and fruit fresh processing and packaging applications; from Alard Equipment Corporation.

For ALL our online listings of IN-STOCK pre-cut produce and fresh-cut food processing and packing equipment,
SEE: OR...

...CALL 315-589-4511 to discuss YOUR particular industrial fruit and vegetable processing and packing equipment needs.

  1. Loma IQ Food Metal Detector with Conveyor Belt, Alard item Y2368

    FOOD METAL DETECTOR with CONVEYOR BELT, 18 inch wide by 7 inch high usable opening, Loma model IQ, all stainless steel.

    A horizontal opening (the aperture opening is wider than it is high) food grade stainless steel digital metal detector. Exact USABLE aperture opening dimensions with the conveyor belt in place are 6 5/8 inches high by 17 5/8 inches wide.

    The search head is mounted on and integrated with a NEW STAINLESS STEEL THROUGH-CONVEYOR, with a 15.75 inch wide by 72 inch long solid plastic interlocking chain type belt over a UHMW plastic bed, on a tubular stainless steel frame. The conveyor belt runs in a left-to-right product flow (from the perspective of the operator control panel), at a 33" working height on height-adjustable foot pads. The conveyor is complete with a BELT-STOP-ALARM reject system with a new PVC control box, and new washdown fractional horsepower drive with a 110 volt single phase electrical input variable speed controller. All components are gasketed / sealed in a food grade sanitary wash down configuration.

    Intended for food product applications; food grade, wash down sealed, stainless steel search head enclosure with touch pad operator controls. For food process metal detection of ferrous, non ferrous, and stainless steel metal contamination in food processing, packaging, and production.

    SEE MORE about Alard Food Grade METAL DETECTORs at:

    Alard item reference #: Y2368

  2. Lock MET 30+ METAL DETECTOR Demo, Alard item Y2968

    Lock MET 30+ METAL DETECTOR Demo, 20 x 9, 8.5 inch high by 19.5 inch wide usable opening, conveyorized; Alard item reference #: Y2968

    SEE MORE about Alard Food Grade METAL DETECTORs at:


    Meyer POLYWASH Mini Power Washer Model MPW 750, manufacturer recommended as a "multi-produce washer" for gentle vegetable, fruit and leafy green product washing, as well as for tubers, roots, seafood, fish, and more, to remove sand, stones, insects, floating debris, and bacteria.

    Turbulent washing zone for vigorous scrubbing action combined with a calm zone for settlement of fine particles.

    Gentle product handling - no mechanical parts in the washing zone, minimizes bacteria build-up and eases sanitation.

    Multi-product: pressureized watner with air injection causes floating products to be forced underwater, while lifting sinking products.

    Flexible: Water flow and air injection are adjustable to allow for variable dwell times.

    Self-dewatering, space-saving: Rotating discharge dewatering drum eliminiates the need for a dewatering shaker at the discharge.

    All food grade stainless steel construction.

    Manufacturer rated for a nominal capacity of 4000 lbs per hour.

    Complete with stand alone electrical control panel with operator controls.

    Components / Configuration:

    24 inch wide by 39 inch long by 13 inch deep "turbulent" infeed section.
    Water-jet panel at infeed end to push product toward discharge.
    Perforated bottom screen, with .5" perforations, and additional wedgewire screen with 3/16" sieves.
    (7) air injection headers under screen/wedge wire to provide agitation of product and removal of debris from product.

    Product is moved under an adjustable height submersion baffle which separates the two sections (see below).

    24 inch wide by 40 inch long "calm" wash section with a rising / tapered solid bottom pan.
    Product continues to be pushed forward by flowing water pressure.
    Dual overflow, floating debris removal ports on either side measure 8 inches wide by 5 inches high for unwanted debris removal, with manually adjustable gates to regulate the amount of overflow.
    Removed debris and water are separated on tapered wedgewire screens on both sides. Strained wash water is reclaimed and returned to the bottom main holding tank.

    24 inch wide by 14 inch diameter powered/revolving discharge end reel with 3/16 inch diameter perforations.
    Two (2) air headers mounted inside of reel to remove any debris which might lodge in the perforations.
    Water passing through the reel is returned to the bottom main holding tank.
    Cleaned / washed product flows over the reel and is discharged from the washer.

    Air for the (7) agitation headers and reel cleanout headers is supplied by a stand alone blower which is mounted inside of an all stainless steel enclosure.
    This blower will need to be plumbed (at installation) to the washer through a 3.5 inch diameter pipe, so the blower and washer can be positioned to best fit the user site.
    The blower is powered by a single 3 phase drive motor.
    The the air being blown into the washer is diverted to the wash section headers and reel cleanout headers through frame mounted plumbing, and has manually adjustable flow valves.

    Water recirculation pump included - an underside mounted pump, powered by a 3 phase drive motor moves water from the main supply tank to the infeed end of the washer through the tubular frame plumbing.

    This leafy green vegetable washer is complete with a gasketed reel cleanout door, debris cleanout in the main tank and cleanout drain ports.

    The standalone electrical control panel is presently set for 460 volt 3 phase power input.

    As of this writing, this industrial food process fruit and vegetable turbulent washer is in stock at Alard in LIKE NEW condition, available for immediate shipment.

    Alard item reference #: Y3305

  4. FOOD METAL DETECTOR with incline conveyor, Alard item Y1337

    GORING KERR MODEL TEK-21 METAL DETECTOR with STAINLESS STEEL Z-shaped "GOOSE-NECK" ELEVATING BELT-CONVEYOR. 3.25 inch high by 7 and 7/8 inch wide usable aperture opening in the epoxy painted aluminum search head enclosure. Z-shaped / goose-neck Schneider stainless steel ELEVATING CONVEYOR with a 8 inch wide by 44 inch long cleated interlocking plastic chain type belt, with a 16 inch long horizontal infeed section, a 44 inch long incline section, and a 28 inch long horizontal discharge section. 15" infeed height, 45 inch discharge height on adjustable-height mounted casters. Right to left product flow from the control panel position. Configured with a compressed-air blow-off reject system, which could be easily converted to a belt-stop-alarm or push-off reject (as appropriate for product / package characteristics). 110volt single phase (standard household current) electrical inputs for both the head and conveyor drive.
    As of this writing, this conveyorized metal detection system is in stock in good operational condition, available for timely shipment.

    SEE MORE about Alard Food Grade METAL DETECTORs at:

    Alard item reference #: Y1337

  5. Urschel OV SLICER, Alard item Y3053


    Manufacturer rated for producing flat or crinkle cut crosscut slices, aka "coin cuts", from elongated food products such as carrots, celery, cucumbers (pickles), peppers, squash,bananas, pepperoni, leeks, etc. With proper cutting parts, slices from 1/16" to1 3/4" can be produced in high volume.

    ~ Currently set up with a 16 blade cutting head for 1/4 inch slices, other cutting configurations available: Call 315-589-4511 and tell us your cutting specification!

    ~ V-trough belt aligns and centers products for uniform cross cut slicing.

    ~ Standard "floppy belt" product hold down mechanism.

    ~ Food grade stainless steel construction including frame.

    ~ Factory control panel with safety interlock system.

    ~ 2 HP 208/230/460 volt 3 phase drive motor.

    As of this writing, this Urschel model OV slicing machine is in stock at Alard,refurbished to EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

    Visit our webpage at for a selection of other Urschel models, or CALL 315-589-4511 for current availability.

    Alard item reference #:Y3053

  6. Urschel Comitrol 3600 screw feed processor mill, Alard item Y3052


    A compact screw fed Comitrol mill for low to high volume operations. Widely used for rework of gelatin capsules, biscuits, candy, noodles and a full spectrum of bakery goods. Also manufacturer recommended for reducing meats, fish, textured vegetable protein, fruits, vegetables, spices, seaweed, cheeses, chemical and pharmeceutical applications.

    - 19 inch by 19 inch by 13 inch deep tapered infeed hopper with side mounted Syntron vibrator to prevent bridging.

    - Powered screw feeder with 1/6 HP 3 phase drive motor.

    - Existing 2 inch cutting head included, manufacturer offers a wide range of cutting heads and impellers for particle sizes ranging from coarse to fine emulsions /powders / granules. CALL 315-589-4511 to discuss your cutting specification.

    ~ Continuous operation for uninterrupted production.

    ~ Designed for easy cleanup and operation.

    - Food grade, all stainless steel product contact surfaces and support frame.

    - 10 HP 208/230/460 volt 3 phase motor for cutting head, with safety interlock system integrated with guards and shrouds.

    As of this writing, this Urschel Comitrol 3600 milling machine is in stock at Alard, in EXCELLENT operational, mechanical and cosmetic condition, ready to go, and available for immediate shipment.

    Alard item reference #:Y3052