No results.

FRESHCUT produce processing equipment,.

Video portfolio of new, reconditioned, and used food processing and packaging equipment for fresh-cut and pre-cut vegetable and fruit fresh processing and packaging applications; from Alard Equipment Corporation.

For ALL our online listings of IN-STOCK pre-cut produce and fresh-cut food processing and packing equipment,
SEE: alard-equipment.com/freshcut/freshlistings.htm OR...

...CALL 315-589-4511 to discuss YOUR particular industrial fruit and vegetable processing and packing equipment needs.

  1. 6-inch pipeline metal detector, washdown, stainless steel Y4816

    INLINE METAL DETECTOR, 6 inch pipeline, with reject valve, all stainless steel USDA food grade sanitary, IP-66 washdown, Alard item Y4816

    CASSEL PIPELINE METAL DETECTOR, with 6 inch tube, automatic reject valve, food grade sanitary stainless steel...

    A stainless steel Cassel inline metal detector with pneumatic divert valve for pumped food products including meats, patees, sauces, pastes, slurries, creams, oils, purees, salsa, refried beans, wet salads, and other viscous or liquid food products hot or cold. Also useful for vacuum packed applications where product is pumped to avoid oxidation. For food safety metal detection on food products as they travel through process pipelines.

    FEATURES:

    ~ Has 6 inch diameter by 36 inch long anti-static UHMW plastic through-tube running through an 8 inch diameter opening in the metal detection sensor-head.
    ~ All USDA sanitary thread inlet/outlet connections / fittings.
    ~ Pneumatic ball valve reject -- straight-through good product discharge, down-facing reject discharge.
    ~ Cord connected factory control box rated for IP66 pressure hose WASH-DOWN applications.
    ~ Digital touch-pad operator controls.
    ~ All food grade sanitary stainless steel construction.
    ~ Metal detection head, divert valve & control panel mounted together on a common stainless steel frame.
    ~ 110 volt single phase (standard household current) electrical input.
    ~ Compressed air required for automatic reject valve.

    As of this writing, this industrial food process pipeline metal detector is in stock at ALARD, in EXCELLENT operational, electrical & cosmetic condition, availa ble for immediate shipment as configured.

    CALL 315-589-4511 to confirm availability and discuss your food process metal detection needs.

    ALARD item reference #: Y4816

  2. DEWATERING SHAKER, aligner, feeder, Alard Y4690

    VIBRATING DEWATERING SHAKER, aligner, even-feeder, 10 feet long 3 feet wide, food grade stainless steel, Alard item Y4600

    BRUYNOOGHE VIBRATORY ALIGNING FEED CONVEYOR, dewatering shaker, 118x39, stainless steel...

    A Bruynooghe shaker aligner, four deck / three step dewatering screen and vibrating feeder, orients elongated fruit & vegetable products into a single direction. An aligning feeder for food products such as green beans, carrots, peppers, pickles, cucumbers, celery, zucchini, leeks, french fries and other strip cuts, stick cuts and more...

    FEATURING:
    ~ 39 inch wide by 118 inch (9 feet 10 inches) long shaker bed currently configured with...
    + Fixed 13.75 inch long solid infeed section.
    + Three (3) removable / replaceable screen sections:
    ++ 19.25 inch long each.
    ++ 1/8 inch rods and 3mm sieves -- rods are inline with flow.
    ++ 1/4 inch step down between each screen section.
    + 3 inch drop to 40-inch-long six (6) lane ALIGNER SECTION with....
    ++ Four (4) individual 1.25 wide aligners per lane..
    ++ Last 8 inch is angled down to more gently convey product downstream.
    ~ 42 inch high infeed, 32.5 inch discharge height
    ~ All food grade sanitary stainless steel construction.
    ~ Vibratory action provided by two (2) 2.5 HP rotary / eccentric vibrator motors .
    ~ 3 phase electrical input.

    As of this writing, this vibrating shaker/aligner is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

    CALL 315-589-4511 to confirm availability and discuss your food handling needs.

    ALARD item reference #: Y4690

  3. Alard peeler-feed conveyor Y4685 with Alard pickle washer brush washer Y4727

    ALARD ELEVATING BELT CONVEYOR / ELEVATING FEED CONVEYOR with HOPPER, 12 inch wide, food grade, stainless steel, cleated belt...

    The Alard cleated belt PEELER-FEED CONVEYOR, was designed to consistently even feed fruit and vegetable products including apples, beets, carrots, cucumbers, potatoes, onions, beets and other root crop vegetables into an Alard peeling machine, or other downstream food processing or packaging equipment. This incline feed conveyor with tapered in-feed hopper is configured at an optimal discharge height for feeding an ALARD 4-roll pickle washer, scrubber, abrasive peeler / brush washer (not included)...

    FEATURES:
    ~ 32 inch wide by 16 inch long tapered stainless steel feed hopper.
    ~ 12 inch wide by 8.5 foot long cleated incline belt.
    ~ Cleated belt with 2 inch high cleats on 6 inch centers.
    ~ The belt runs between 7.5 inch high sides flared to 17 inches wide at the tops.
    ~ 33 inch infeed height, 53 inch high discharge with discharge chute.
    ~ All food grade sanitary stainless steel construction.
    ~ Top mounted 1 HP drive motor.
    ~ 208 / 230 / 460 volt 3 phase electrical input. Variable speed controller available at extra charge (Call 315-589-4511 to discuss your food process feed conveyor requirements).

    As of this writing, this elevating belt conveyor is NEW in stock at ALARD, available for immediate shipment.

    CALL 315-589-4511 to confirm availability and discuss your industrial food processing and packaging bulk food handling needs.

    ALARD item reference #: Y4685

    FOUR ROLL BRUSH WASHER / PICKLE-WASHER / SCRUBBER for pickles, cucumbers, and other fruits and vegetables, stainless steel, in-stock NEW...

    A versatile washer for fresh pack pickles, brine stock, beets, potatoes, carrots, and other similar vegetables. With brushes this continuous four roll brush-washing scrubbing and/or pickle washing machine. It can also be fitted with any combination of brushes and/or abrasive rolls for peeling, brush washing, scrubbing, or finishing (e.g. in combination with another peeler, scrubber, or steam peeler) of fruits and vegetables such as potatoes, beets, carrots, onions, cucumbers, pickles, apples, oranges and other raw fresh produce items.

    OPERATION:
    Raw product is continuously fed to the brush-washing / peeling chamber and subjected to the spinning rolls (abrasive and/or brushes as the case may be). It is important that a sufficient amount of product be kept in the peeling chamber during operation for best results. Lubricating and rinsing action is provided in the chamber by overhead sprays, while the flow of product through the machine is regulated both by a weighted discharge door, and the inclination of the machine. The water spray, rotating brushes and friction of the products rubbing against each other tumble and turn the product so that it is thoroughly scrubbed from every conceivable angle.

    FEATURES:
    ~ 15 inch by 27 inch top hopper inlet opening in the hinged stainless steel cover at 57 inch infeed height.
    ~ Currently configured with four (4) hex-pex black poly brush rolls useful for is ideal for removing pickle nodes, pickle thorns or pickle hair removel, as well as other washing, scrubbing, and finishing applications. Can be set up with any combination of abrasive or brush rolls to buyer need / specification for stronger or gentler peeling, scrubbing, action. Call 315-589-4511 to discuss your particular scrubber, washer, peeler application.
    ~ Each spinning roll is 6 inches in diameter by 6 foot long.
    ~ Lubricating and rinsing action is provided in the chamber via a stainless steel water spray pipe header with spray nozzles.
    ~ Peeled product discharges through a stainless steel discharge flapper-gate which is adjustable so product can be subjected to a longer or shorter peeler /washing exposure; --at a 39 inch discharge height.
    ~ Water, dirt, stems, leaves, peels, and other debris drop to a full length stainless steel water catch pan with a 6 inch by 6 inch center bottom outlet. We recommend an Alardsieve water filter to remove debris so your washwater can be reused. Call 315-589-4511 to discuss your water reclaim screen requirements.
    ~ Capacities run in the ton-per-hour range more or less, depending on product and application (peeling, washing) and the degree of finish desired.
    ~ The abrasive brush rolls are mounted parallel (in-line) with product flow.
    ~ Complete with central lubrication cluster for ease of maintenance.
    ~ Chain / sprocket drive powered by a 3HP 208/230/460 volt 3 phase 60 cycle constant speed motor.
    ~ We recommend an optional "soft start" variable speed controller in a gasketed PVC NEMA 4 control box. Call 315-589-4511 for pricing.

    As of this writing, ALARD EQUIPMENT has this model available NEW in stock and available for immediate shipment.

    CALL 315-589-4511 to confirm availability and discuss your particular fruit and/
    or vegetable peeling and washing equipment need.

    ALARD item reference #: Y4727

  4. Refurbished Bock FP95 SPIN DRYER, Alard item Y4531

    BOCK SPIN DRYER MODEL FP95 CENTRIFUGE...

    A refubished Bock / North Star Engineered Products FP-95 CENTRIFUGE, food-grade batch centrifugal system with a manufacturer rated capacity of up to 1,950 lbs per hour. This industrial salad-spinner is an industry-standard tool for spin drying and dewatering of fresh-cut produce products for pre-cut produce packing applications...

    FEATURES:

    ~ 30 inch diameter by 18 inch deep basket manufacturer rated for 130 lbs capacity, with lifting yoke and basket dolly included.
    ~ Pneumatic self-raising lid for ease of operation.
    ~ Safety lid interlock system prevents opening until cycle is complete and basket is stopped.
    ~ All food grade stainless steel construction including support base, heavy-duty build.
    ~ Gasketed stainless steel factory remote control box with electrical controls including timer, programmable variable speed controller, and electronic braking system.
    ~ 460 volt 3 phase electrical input, and 6-80 psi / 2cfm compressed air.
    ~ 7.5 HP 3 phase drive motor.
    ~ Comes with a square drain tank, sized to hold a basket while filling and with a front bottom drain outlet, on casters (see pictures online).

    As of this writing, this reconditioed Bock spinner is in stock in EXCELLENT operational, electrical, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your particular pre-cut produce packing equipment needs.

    Alard item reference #:Y4531

  5. Urschel model GA DICER - test run, Y4547

    Refurbished Urschel model G-A, DICER, strip cutter, slicer, Alard item Y4547

    URSCHEL Model G-A DICER, strip cutter, slicer, French fry cutter...

    A reconditioned Urschel dicer. The Urschel model G-A is a three-dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.

    Three cutting dimensions...

    ~ Slice thickness: From 1/8 inch (3.2mm), up to 3/4 inch (19.1mm), (knob adjustable).
    ~ Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).
    ~ Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 7/8 inch (22.2mm), (change part).
    ~ By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).
    ~ Cuts uniform cubes / dices up to 3/4 inch.
    ~ We can complete this machine with cutting parts to fit most standard cutting specifications: Please call 315-589-4511 to tell us your cut size requirement!

    This cutting machine FEATURES...
    ~ Stainless steel slice shell and impeller with 10 inch diameter slice shell opening.
    ~ Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.
    ~ Stainless steel factory control box with safety interlock system.
    ~ Casters (locking on drive end) for portability.
    ~ 2 HP 3 phase drive with stainless steel shrouded motor.
    ~ 460 volt 3 phase electrical input.

    As of this writing, this reconditioned Urschel dicer is in stock, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for timely shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your industrial volume food cutting machine / equipment needs.

    Alard item reference #: Y4547

  6. Bock HELICAL WASHER, turbulent-flow fruit and vegetable WASHER, Y4593

    LAMINAR FLOW fruit and vegetable WASHER FLUME, food grade stainless steel...

    A Bock / North Star Engineered Product (NSEP) Model HW3800 HELICAL WASH SYSTEM is a turbulent-flow IMMERSION WASHER FLUME with water-jet agitation for gentle but forceful washing of pre-cut fruits and vegetables, including cut or whole leafy greens such as delicate leaf products like spinach, baby spinach, spring mix and other pre-cut produce food products.

    FEATURES:
    ~ The laminar-flow HELICAL WASH FLUME is 8.3 feet long by 20 inches wide by 29 inch deep U-trough.
    ~ Agitating water jets provide spiral water flow for gentle immersion washing of delicate food products:
    ~ Three (3) forward facing 3/8 inch diameter adjustable nozzles.
    ~ Six (6) 3/8 inch diameter adjustable nozzles along left-side upper edge.
    ~ Seven (7) 1 inch diameter adjustable nozzle along left-side bottom edge.
    ~ The wash tank overflows onto a 29 inch long by 18 inch wide VIBRATING DISCHARGE CONVEYOR with removable 3/16 inch diameter perforated screen to allow the water to pass through while discharging the dewatered product onward.
    ~ The water falls through into a stainless steel catch and balance tank, outfitted with a 1/32 inch diameter perforated screen and twin 2 HP recirculation pumps.
    ~ Stainless steel operator control panel.
    ~ All food grade sanitary stainless steel construction.
    ~ 208/230 volt 3 phase electrical input.

    As of this writing, this spiral-flow washer is IN STOCK at Alard, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your fresh-cut produce packing and process equipment needs.

    Alard item reference #: Y4593