No results.

FRESHCUT produce processing equipment,.

Video portfolio of new, reconditioned, and used food processing and packaging equipment for fresh-cut and pre-cut vegetable and fruit fresh processing and packaging applications; from Alard Equipment Corporation.

For ALL our online listings of IN-STOCK pre-cut produce and fresh-cut food processing and packing equipment,
SEE: alard-equipment.com/freshcut/freshlistings.htm OR...

...CALL 315-589-4511 to discuss YOUR particular industrial fruit and vegetable processing and packing equipment needs.

  1. Commercial Vibrating DEWATERNG SHAKER, Y4870

    Used Commercial vibratory shaker-grader, 87 x 24, with dewatering pan, food grade, stainless steel, Alard item Y4870

    VIBRATING FEED CONVEYOR / VIBRATORY GRADER SHAKER SCREEN / DEWATERING SHAKER, 87x24, all stainless steel...

    A Commercial vibrating feeder-shaker-screener with quick-release interchangeable screen for vibratory grading, size sorting, fines removal, grading out shorts, solids separation, dewatering and even-feeding whole or cut food products to downstream components in an industrial food processing line...

    FEATURES:
    ~ 24 inch wide by 87 inch long shaker bed with:
    + 18 inch long solid infeed section.
    + One (1) screen bed section measuring 24 inch wide by 48 inch long.
    ++ Screen has 1/8 inch wedgewire with 1/8 inch sieve running parallel to flow.
    ++ Quick release clamps for easy removal.
    + 21 inch long solid surface discharge section.
    + 4 inch high sidewalls.
    ~ Drain pan with 4 inch diameter outlet.
    ~ All food grade sanitary stainless steel construction.
    ~ Ajax eccentric drive powered by a new 1.5 HP motor.
    ~ 208/230/460 volt 3 phase electrical input.

    As of this writing, this vibrating conveyor is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

    CALL 315-589-4511 to confirm availability and discuss your particular food processing equipment needs.

    ALARD item reference #: Y4870

  2. CVP A300 VACUUM, gas-flush BAG SEALER Y5055

    Used CVP A-300 BAG SEALER, Freshpack modified atmosphere packaging machine, reconditioned / refurished, in-stock at Alard, item Y5055

    CVP VACUUM / GAS-FLUSH BAG SEALER, Model A-300, 34 inch seal bar.

    A refurbished CVP A300 Fresh Vac food grade dual-snorkel jaw type bag sealing machine, with vane pump, for industrial food process applications. Manufacturer rated for modified atmosphere packaging of food products, including vegetables, poultry, beef, pork, lamb, sausage, fish, cheese, for extended shelf life.

    FEATURING:
    ~ 34 inch seal bar with two (2) snorkels with hand activated controls.
    ~ Vacuum and gas-flush capability, (2) vac & (2) gas settings with selector & heat/cooler timers -- extends shelf life, preserves color of pre-cut produce, asphyxiates insects & larva in organic products.
    ~ Adjustable angle stainless steel frame, with threaded rod adjustable feet.
    ~ USDA food grade sanitary stainless steel construction.
    ~ Powerful .75 HP GAST VANE vacuum pump.
    ~ 110 volt single phase (standard household current) electrical input.
    ~ Pneumatically powered seal bars and snorkels require compressed air supply input.

    As of this writing, this CVP Freshvac modified atmosphere bag sealer is in stock at ALARD, refurbished to EXCELLENT operational, pneumatic, electrical, mechanical and cosmetic condition, available for immediate shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your particular food packaging equipment needs.

    ALARD item reference #:Y5055

  3. Urschel Diversacut 2110 cutting squash and sweet potatoes Y5164

    Used Urschel DiversaCut 2110 DICER, in-stock like-new at Alard, item Y5164.

    URSCHEL DIVERSACUT 2110 DICER...

    An Urschel Model 2100 DC dicer is the largest machine in the Diversacut line, specifically designed to accept large infeed products up to 10 inches long, providing similarly long cuts such as for vegetable noodles. A versatile, tons-per-hour industrial food process cutting machine / dicer / slicer / julienne cutter, which uniformly cuts flat or crinkle cut dices, cubes, strips / strip cuts, french fry cuts, vegetable noodle cuts, and slices from a wide variety of food products at high production capacities with speeds dependent on materials, application and machine configuration. This dicer is designed with precise cut tolerances with slice adjustment / lock-down features which allow fine-tuning and ultimate precision...

    MANUFACTURER SPECIFICATIONS:
    ~ Slice shell: 1/16 inch to 1 inch (1.6 to 25.4 mm) -- knob adjustable.
    ~ Circular knife: 1/8 to 3 inch (3.2 to 76.2 mm) -- spindle with knives & spacers.
    ~ Crosscut knife -- change part:
    + Flat cut: 3/32 to 1.5 inch (2.4 to 38.1 mm)
    + Crinkle Cut: 9/32 to .583 inch (7.1 to 1438 mm) with .076 inch depth.
    + "Deep Crinkle Cut”: 3/8 to 1/2 inch (9.5 to 12.7 mm) with either .125 or .145 depth.
    + V-cuts: 5/16 to 1/2 inch (7.9 to 12.7 mm).
    ~ Flat or krinkle-cut cutting parts can be used in various combinations for cubes, strip cuts, rectangular cuts, julienne cuts, slices, flat or krinkle-cut french fry strips. Works as a one-dimensional, two-dimensional or three-dimensional cutter. CALL 315-589-4511 to discuss YOUR particular food process cutting machine requirements.
    ~ Manufacturer rated for input size up to 10 inches (254mm) in any dimension which reduces need to pre-cut product; --but existing impeller has (8) paddles on 5.5 inch centers, so practical product input dimensions would be 10 inches long by 5 inches in diameter. CALL 315-589-4511 to discuss your particular food process cutting machine requirements.
    ~ This cutter is manufacturer rated for a wide range of fruit, vegetable, and meat cutting applications, including flat or crinkle cut french fries, ham, fish, breads, cookie/candy granulations, strawberries, carrots, tomatoes, green peppers, ginger, kale, zucchini, sweet potatoes, carrots, plus many more!

    FEATURES:
    ~ Came set for flat slice dices (would require significant change parts for crinkle cuts); -- other cutting parts available from the manufacturer. CALL 315-589-4511 to discuss YOUR food process cutting machine specifications.
    ~ 5 HP stainless steel shrouded drive motor,
    ~ Factory stainless steel operator control panel with safety interlock system.
    ~ All sanitary food grade construction including frame, guards, shrouds, infeed hopper and discharge chute.
    ~ 460 volt 3 phase electrical input.

    As of this writing, this Urschel Diversacut 2110 dicer is in stock at ALARD, in LIKE NEW operational, mechanical, electrical & cosmetic condition, available for timely shipment.

    CALL 315-589-4511 to confirm availability and discuss your particular food process cutting machine requirements.

    ALARD item reference #: Y5164

  4. Tenrit Solo C KNIFE PEELER, Y5377

    Used Tenrit SOLO C KNIFE PEELER for carrots and other elongated vegetables, in-stock, excellent condition, Alard item Y5377

    TENRIT SOLO C KNIFE PEELER for elongated vegetables...

    The Tenrit Solo C is a vegetable peeling machine manufacturer recommended for carrots, cucumbers, parsnips, salisfies, and other elongated vegetables, which uses a series of peeling knives to peel these elongated vegetable products at high volume capacities, while simulating the clean, smooth look and texture of hand-peeled product.

    OPERATION:

    The vegetables are hand fed (the machine can also be fed with an optional v-belt, not included) into the feed end through a series of pneumatically sprung side-by-side transport roller pairs which transport the product so that it comes in contact with a series of blades at varying orientations so that the product is completely peeled during it's transit through the machine. The transport rollers and peeling knives flex to conform to the shape of the vegetable passing through the machine.

    SPECIFICATIONS – Manufacturer literature rates this machine for...
    ~ Vegetable diameter from .75 to 2.5 inches (20mm to 65mm).
    ~ Vegetable length must be 4 inches (100 mm) or longer .
    ~ Throughput Capacity: Up to 4,000 pieces per hour.
    ~ Yield loss to peeling: Approximately 10 to 20%.

    FEATURES:

    ~ Feed shelf, provides a working surface for aligning and staging product prior to feeding.
    ~ Semiautomatic – hand feed, the machine does the rest.
    ~ Knob-adjustable pneumatic pressure regulator for roller tension.
    ~ Discharge hopper catches peeled product.
    ~ Peels drop beneath the machine into a full length stainless steel collection-tote on wheels, easily rolls out from under the machine for easy dumping and disposal of peels.
    ~ Color touch-screen control.
    ~ All food grade sanitary stainless steel.
    ~ Safety interlock system on access door, emergency safety stop switch.
    ~ Portable, on (4) lockable casters.
    ~ Requires compressed air and 220 volt single phase electrical input.

    As of this writing this knive carrot peeler is in stock at Alard, in EXCELLENT operational, mechanical, pneumatic, electrical and cosmetic condition, available for immediate shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your fresh-cut vegetable / pre-cut produce processing equipment needs.

    Alard item reference #: Y5377

  5. Alard food grade TURBULENT WASHER, Y5113

    Alard TURBULENT IMMERSION WASHER, water-jet agitated wasah flume for leafy greens, pre-cut vegetabes and fresh-cut fruits, food grade stainless steel, Alard item Y5113

    Alard TURBULENT FLOW JET WASHER, leafy green, fruit and vegetable WASHER FLUME, food grade stainless steel...

    An AGITATED IMMERSION WASH SYSTEM, wash and chill flume, with water-jet agitation for gentle but active washing for pre-cut fruits and vegetables, including cut or whole leafy greens, including delicate leaf products like spinach, baby spinach, spring mix and other pre-cut produce food products.

    FEATURES:
    ~ This spiral-flow turbulent immersion washer flume is 11 feet long by 31 inches wide with agitating water jets all along the left-side near the bottom to provide spiral water flow for gentle immersion washing of delicate food products.
    ~ The helical flow wash tank overflows onto a 5 foot long by 30 inch wide ELEVATING DISCHARGE CONVEYOR with an interlocking chain type belt with fine perforations to allow the water to pass through while discharging the dewatered product onward.
    ~ The conveyor is powered by a .5 HP stainless steel shrouded motor with an aluminum body gear reducer.
    ~ The water falls through into a stainless steel catch and balance tank, with a new Thomsen model 8 stainless steel RECIRCULATION PUMP with 7.5 HP motor.
    ~ Check valve included to keep the wash tank water from draining into the wash tank when the pump is shut off.
    ~ All pipe fittings / connections are USDA food-grade sanitary.
    ~ All food-grade sanitary stainless steel construction.
    ~ The water jet nozzles are removable for sanitation.
    ~ All drives 208 / 230 / 460 volt 3 phase electrical input.

    As of this writing, this spiral-flow washer is NEW IN STOCK at Alard, in fully assembled and available for immediate shipment.

    CALL 315-589-4511 to confirm availability, and to discuss your fresh-cut produce packing and process equipment needs.

    Alard item reference #: Y5113

  6. Air injected TURBULENT WASHER for cut produce, Y4500

    IMMERSION WASHER for PRODUCE, with AIR INJECTION for TURBULENT washing, food grade, stainless steel...

    A versatile turbulent washer for almost any pre-cut / fruit or fresh-cut vegetable product with multiple spray bars to motivate product in a downstream direction and air injection for increased removal of bugs, dirt, and other detritus, using ambient or chilled water. This helical washer, with forced air bubbles, is like a gentle Jaccuzi bath for your whole, sliced, diced, fruits and vegetables, and / or leafy vegetables.

    FEATURES:
    ~ 13 foot long by 29 inch wide by 12 inch deep turbulent wash tank, with water jets:
    + Seven (7) forward facing spray nozzles with manual control valve.
    + Six (6) adjustable spray jets with manual control valve.
    + Perforated bottom plates with 3/16 inch perforations to trap sand and fine gravel -- removable for ease of clean-out sanitation..
    + 32 inch high infeed
    + Water recirculation pump powered by 4HP motor.

    ~ AIR AGITATION / INJECTION for increased scrubbing action::
    + Sixteen (16) rows of headers percolate air up through the perforated bottom plates.
    + Manual control valves.
    + Air Blower driven by a 7 HP motor.

    ~ Two (2) 6 inch diameter by 24 inch wide powered poly brushes to increase release of surface debris, insects and other foreign material.
    + Spray bar with five (5) fixed spray nozzles and manual control valve.
    + 1/3 HP chain drive motor.

    ~ Equipped with "bug reel" for scavenging insects and other floating debris from recirculating wash water:
    + 24 inch diameter by 28 inch wide drum with 1/4 inch perforations.
    + 1/3 HP drive motor
    + Reel is hinged for cleaning & sanitation.
    + Collected debris is deposited onto a side overflow tank with removable perforated screens.

    ~ Inline bag filter for removal of fines from water stream.

    ~ Elevating product discharge conveyor with stainless steel wire woven belting:
    + 1.5 inch high flights on 10 inch centers.
    + Four (4) water spray bar headers with a total of fourteen (14) adjustable jets and manual control valve
    + 1 HP drive motor for conveyor.
    + 48 inch discharge height.
    ~ Stainless steel operator control panel.
    ~ All food grade sanitary stainless steel construction.
    ~ 460 volt 3 phase electrical input.

    As of this writing, this air injected immersion jet washer is in stock at ALARD, in VERY GOOD condition and available for timely shipment.

    CALL 315-589-4511 to confirm availability and discuss your industrial food washing needs.

    ALARD item reference #: Y4500